NOTE: Computer and home automation software required to build a Z-Wave gateway. Sold separately. SPECIFICATIONS: * Model Number: ZST39 LR * Z-Wave Signal Frequency: 908.42 MHz * Power: 4.75-5.25 VDC * Z-Wave Range: Up to 1 mile in open space with Z-Wave Long Range enabled * Operating Temperature: 14-104° F * Installation and Use: Indoor only * Dimensions: 2" x 0.8" x 0.3" COMPATIBLE SYSTEMS: * Windows 2000, XP, Vista, 7, 8 (32 / 64 bit) * Linux kernel 2.6.24+ * MAC OS X 6.4

ADVANCED Z-WAVE: Works great with the most popular software like Home Assitant (with JS) and HomeSeer. Supports OTA firmware updates and and all of the latest Z-Wave library commands. WHAT YOU NEED: This 800 Series Long Range Stick adds Z-Wave Plus and Z-Wave Long Range capability to your DIY smart home set-up. You'll need a dedicated computer (PC, laptop, or Raspberry Pi, sold separately) and home automation software of your choice (not included) to complete the system. NEW 800 SERIES Z-WAVE LONG RANGE: Take advantage of the latest wireless innovation with Z-Wave Long Range that extends your network coverage up to a mile. NOTE: Your home automation software needs to support the Long Range implementation on the interface side as well as the end Z-Wave device you add to the network for the Long Range functionality to be fully unlocked. READ BEFORE YOU BUY: The Z-Wave stick is for advanced users only, NOT for beginners. You must be comfortable with programming and have expert computer and Z-Wave knowledge to use this device. NVM back-up from 500 or 700 series Z-Wave sticks will brick the device. Do NOT apply NVM backups or firmware updates published outside of the Zooz support portal to avoid bricking the stick and voiding its warranty.