Upgraded Air Vent Hook, Convenient for Installation
Air Vent Application Tips
STEP1: Unscrew the nut on the phone cradle back, insert the ball head into the hole, and then twist the nut to tighten;
STEP2: Make the blade downward, rotate the air vent hook clip left/counterclockwise to "release" the blade;
STEP3: Insert the blade into your car vent. Rotate the hook right/clockwise to "Lock" so that it can fix on the car vent.
It is recommended to retighten the vent clip once every two weeks to ensure it remains stable.
IMPORTANT:
a. NOT SUITABLE for non-intensive, circular, or special-shaped car vents.
b. The retractable length of the hook is 10mm-32mm (0.39inch-2.75inch); The width of the hook is 9mm/0.35inch; Compatible blade depth is 32mm/1.25inch, thickness is 4.0mm/0.16inch.
c. The air outlet blades with a width of more than 32mm/2.75inch will NOT be used for this hook clip.
d. Quick measurement : Use your little finger to measure, if the blade"s width exceeds the length of the first section of the finger, it means it cannot be used.