Easy to install

2.Pleace the suction cups into the notch of machine pillars.

3.Completed!Your knitting machine will stand more stably during knitting.

Yarn guide

After the first loop of hanging the yarn, pay attention to the yarn should pass through the yarn guide opening and be placed in the groove, and shouldn't float on the surface. This is also one of the reasons why many customers drop stitches.

Tension Lever

Different sizes of yarn need different degree of tightness control. It shouldn't too loose or too tight during the weaving process. Please adjust the position of the tensioner in advance.

Using Methods

1. Choose the flat needle mode or tube needle mode.

2. The first needle should be in the hook and the second needle should be in the back of the needle.

3.Threading at intervals, and start hooking all knitting.

4.Pierce the lead, the wool threaded into the thread mouth, hook knitting.

5.Turn the crank to weave your own scarf, hat or sweater.

P Switch Up:Panel Knitting

Gear plain weave is used for needle reduction. Scarves, bags, sweaters, pillows, clothes, etc. can be knitted. If stistchs are being dropped at ends of flat panel,make sure you are turning crank all the way in each direction until the machine comes to a complete stop.

T Switch Down:Tube Knitting

Tube circular weaving is used for fixed number of stitches! Hats, gloves, rag dolls, etc. can be knitted.While slowly turning the handle,go through each of the stitches alternating from going through the front of and back of the lowered needle.You must do this to the right of the yarn holder.All the stitches should now have yarn through them.