Wykamol MCS1 Mould Clear Solution Spray is the complete Mould eradication and prevention product. MCS1 kills and prevents mould growth. It is a surface biocide for use on hard surfaces against algae, moulds, moss and lichen. Wykamol MCS1 No More Mould Spray protects decorative finishes from further attack. It is non-staining and quick acting. Removes and kills mould for up to 5 years when used in conjunction with No More Mould MSC3. Size: 500ml Usage Instructions: Spray MCS1 Mould Clear Solution onto the affected surface from a distance of 3-5 cm. Treat visible mould PLUS 1 metre beyond. Repeat the treatment on badly affected areas after 10-15 minutes. Areas to be treated: a) Painted and timber areas - spray the area thoroughly with the MCS1 Mould Clear Solution. b) Papered areas - spray the paper. The Mould Clear Solution acts as a biocide and stripping agent. Bag the mould-contaminated paper and remove it from the property. Treat the exposed plaster again with thorough spraying. c) General preparation - once the surface is dry, scrape off any loose flaking paint and rub down. Previously painted surfaces must be etched using sandpaper. This solution should cover approximately 12.5 m² INGREDIENTS 2-phenylphenol

Non-staining and quick acting. Cleans and sterilises surfaces. Protects decorative finishes. Removes and kills mould for up to 5 years when used in conjunction with MCS3 Paint Additive. Can be used on walls, ceilings, window reveals, frames, doors etc.