Overview Need more Flash for Raspberry Pi Pico? Dislike the outdated Micro USB connector? All these problems are solved by our RP2040-Plus now. As same as Raspberry Pi Pico, it incorporates the RP2040 microcontroller, with dual-core Arm Cortex M0+ processor running up to 133 MHz, and 26x multi-function GPIO pins. What's different, it features onboard 4MB Flash, USB-C connector, recharge header, and higher current DC-DC chip. And it is RP2040-Plus Board with Pre-Soldered Pinheader. Key Features RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz 264KB of SRAM, and 4MB of onboard Flash memory USB-C connector, keeps it up to date, easier to use Lithium battery recharge/discharge header, suitable for mobile devices Onboard DC-DC chip TPS63000, high-efficiency DC-DC buck-boost chip, 1.8A current switch The castellated module allows soldering directly to carrier boards USB 1.1 with device and host support Low-power sleep and dormant modes Drag-and-drop programming using mass storage over USB 26 × multi-function GPIO pins 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels Accurate clock and timer on-chip Temperature sensor Accelerated floating-point libraries on-chip 8 × Programmable I/O (PIO) state machines for custom peripheral support Support C/C++,MicroPython: Comprehensive SDK, development resources, tutorials to help you easily get started Compatible with most of the Raspberry Pi Pico add-on modules Package Content RP2040-Plus without header x1Accurate clock and timer on-chip. Temperature sensor. Accelerated floating-point libraries on-chip. 8 × Programmable I/O (PIO) state machines for custom peripheral support. User Manual/Resource:waveshare.com/wiki/RP2040-Plus?. Castellated module allows soldering direct to carrier boards. USB 1.1 with device and host support. Low-power sleep and dormant modes. Drag-and-drop programming using mass storage over USB. Lithium battery recharge/discharge header, suitable for mobile devices. Onboard DC-DC chip TPS63000, high efficiency DC-DC buck-boost chip, 1.8A current switch. 26 × multi-function GPIO pins,configurable pin function, allows flexible development and integration.2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels. RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom. Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz. 264KB of SRAM, and 4MB of on-board Flash memory. USB-C connector, keeps it up to date, easier to use. RP2040-Plus Board, a Pico-like MCU Board Based on Raspberry Pi Microcontroller RP2040. 1) As same as Raspberry Pi Pico, with dual-core Arm Cortex M0+ processor running up to 133 MHz, and 26x multi-function GPIO pins. 2) The most different features of RP2040-Plus are that it onboard 4MB Flash, USB-C connector, recharge header, and higher current DC-DC chip. 3) RP2040-Plus Board.
