Raspberry Pi Pico incorporates Raspberry Pi's own RP2040 microcontroller chip, with a dual-core Arm Cortex M0+ processor running up to 133 MHz, embedded 264KB of SRAM, and 2MB of onboard Flash memory, as well as 26 x multi-function GPIO pins. For software development, either Raspberry Pi's C/C++ SDK or the MicroPython is available. There are also complete development resources and tutorials to help you get started easily, and integrate it into end products quickly. Board Features * RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom. * Dual-core Arm Cortex M0+ processor, the flexible clock running up to 133 MHz. * 264KB of SRAM, and 2MB of onboard Flash memory. * Castellated module allows soldering direct to carrier boards. * USB 1.1 with device and host support. * Low-power sleep and dormant modes. * Drag-and-drop programming using mass storage over USB. * 26 × multi-function GPIO pins. * 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels. * Accurate clock and timer on-chip. * Temperature sensor. * Accelerated floating-point libraries on-chip. * 8 × Programmable I/O (PIO) state machines for custom peripheral support. Online Resource and Documentation: //bit.ly/3Ge0T2v Difference between Raspberry Pi and Raspberry Pi Pico Raspberry Pi Pico is a microcontroller where you can utilize its physical computing to control components such as sensors, LEDs, and motors to achieve some basic functions. Unlike Raspberry Pi, the single board computer(SBC), Pico has not installed an operating system. Instead, it can be directly programmed to use, which makes it easier to control. Package Content Raspberry Pi Pico with pre-soldered header x1 1*3PIN yellow pin header x1 USB-A to micro-B cable x1

In addition to powerful hardware resources, Pico has rich and complete software support and community resources. It comes with a complete Rasberry Pi official C/C++ SDK, Micropython SDK. 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels. Embedded 264KB of SRAM and 2MB of on-board Flash memory, as well as 26x multi-function GPIO pins. The Raspberry Pi Pico incorporates Raspberry Pi's own RP2040 microcontroller chip, with dual-core Arm Cortex M0+ processor running up to 133 MHz. The Raspberry Pi Pico is a microcontroller board based on the Raspberry Pi RP2040 microcontroller chip. It has been designed to be a low-cost, high-performance microcontroller board with flexible digital interfaces. This kit includes Raspberry Pi Pico with pre-soldered header and USB cable.