Overview The ESP32-C6-DEV-KIT-N8 is a compact microcontroller development board with multiple peripheral interfaces. In terms of hardware, it adopts ESP32-C6-WROOM-1 module with a RISC-V 32-bit single-core processor. It supports up to 160MHz clock frequency with built-in 320KB ROM, 512KB HP SRAM, and 16KB LP SRAM. Onboard CH343 UART and CH334 USB HUB chips, it supports USB and UART development at the same time via a USB-C port. Compatible with the pinout of ESP32-C6-DevKitC-1-N8 development board, it is more convenient to use and expand a variety of peripheral modules. Comes with online examples and tutorials for ESP-IDF development environment, so that you can easily and quickly get started and apply it to the product. Features -- Adopts ESP32-C6-WROOM-1-N8 module with RISC-V 32-bit single-core processor, up to 160MHz main frequency, built-in 8MB Flash. -- Integrated 320KB ROM, 512KB HP SRAM, 16KB LP SRAM, and 8MB Flash memory. -- Integrated 2.4GHz WiFi 6, low-power Bluetooth (Bluetooth LE), and IEEE 802.15.4 (Zigbee 3.0 and Thread) wireless communication, with superior RF performance. -- Type-C connector, easier to use. -- Onboard CH343 and CH334 chips can meet the needs of USB and UART development via a Type-C interface. -- Rich peripheral interfaces, compatible with the pinout of ESP32-C6-DevKitC-1-N8 development board, offer strong compatibility and expandability. -- The castellated module allows soldering directly to carrier boards. -- Supports a variety of low-power operating states, adjustable communication distance, data rate, and power consumption balance, to meet the power requirements of various application scenarios. Package Content ESP32-C6-DEV-KIT-N8 with pre-soldered header x1 NOTE: Development Resources and Technical Support are provided, please feel free to contact us if you have any problem!

Comes with online examples and tutorials for ESP-IDF development environment. Onboard CH343 and CH334 USB HUB chips, supports USB and UART development at the same time via a USB-C port. Integrates rich peripherals including SPI, UART, I2C, I2S, LED PWM, SDIO and other interfaces, compatible with the pinout of ESP32-C6-DevKitC-1-N8 development board, more convenient to use and expand a variety of peripheral modules. Integrates WiFi 6, Bluetooth 5 and and IEEE 802.15.4 (Zigbee 3.0 and Thread) wireless communication, with superior RF performance. ESP32-C6 WiFi 6 microcontroller development board (with Pinheader), adopts ESP32-C6-WROOM-1-N8 module, which is equipped with RISC-V 32-bit single-core processor, up to 160MHz main frequency, built-in 8MB Flash.