Overview 4G/3G/GNSS HAT for Raspberry Pi and Jetson Nano, LTE CAT4, for North America (US, CA) The SIM7600A-H 4G HAT is a 4G communication and GNSS positioning module, which supports LTE CAT4 up to 150Mbps for downlink data transfer,low power consumption You can connect the 4G module with computer to surf the Internet, or attach it onto Raspberry Pi to enable functions like 4G high speed connection, wireless communication, calling, Sending SMS, global positioning, etc Features * with Standard Pi 40PIN GPIO extension header, for Raspberry Pi series boards, and Jetson Nano * Support dial-up, telephone call, SMS, MMS, mail, TCP, UDP, DTMF, HTTP, FTP, etc. * Support GPS, BeiDou, Glonass, LBS base station positioning * Onboard USB interface, to test AT Commands, get GPS positioning data, and so on * Onboard CP2102 USB to UART converter, for serial debugging * Breakout UART control pins, to connect with host boards like Arduino/STM32 * SIM card slot, support 1.8V/3V SIM card * Onboard audio jack and audio decoder for making telephone call * 2x LED indicators, easy to monitor the working status * Onboard voltage translator, operating voltage can be configured to 3.3V or 5V via jumper * Baudrate: 300bps ~ 4Mbps (default: 115200bps) * Autobauding baudrate: 9600bps ~ 115200bps * Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set) * Support SIM application toolkit: SAT Class 3, USAT * Come with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32) More Specification * Power supply: 5V * Operating voltage: 5V/3.3V (configured via jumper) * Operating temperature: -30°C ~ 80°C * Storage temperature: -45°C ~ 90°C * Dimension: 56.21mm x 65.15mm * Online User Manual :/bit.ly/3QkeUjW

Breakout UART control pins, to connect with host boards like Arduino/STM32.Autobauding baudrate: 9600bps ~ 115200bps.Baudrate: 300bps ~ 4Mbps (default: 115200bps).Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set).2x LED indicators, easy to monitor the working status. Supports dial-up, telephone call, SMS, MMS, mail, TCP, UDP, DTMF, HTTP, FTP, etc.Supports GPS, BeiDou, Glonass, LBS base station positioning.Supports SIM application toolkit: SAT Class 3, USAT. Onboard USB interface, to test AT Commands, get GPS positioning data,etc.Onboard CP2102 USB to UART converter, for serial debugging.Onboard audio jack and audio decoder for making telephone call.Onboard voltage translator, operating voltage can be configured to 3.3V or 5V via jumper. You can connect this 4G module with computer to surf the Internet, or attach it onto Raspberry Pi to enable functions like 4G high speed connection, wireless communication, making telephone call, sending SMS, global positioning, etc. The SIM7600A-H 4G HAT (Based on SIM7600A-H) is a 4G communication and GNSS positioning module, Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards(compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+/4B) and Jetson Nano. LTE-FDD B2/B4/B12 Brand,supports LTE CAT4 up to 150Mbps for downlink data transfer.This module is mainly applicable in North America (US,CA).