Overview 2.23inch OLED Display Module For Raspberry Pi Pico, 128×32 Pixels, SPI/I2C Interface 1.2.23" OLED Display Module For Pico Embedded SSD1305 Driver, Using SPI/I2C Bus Comes with Raspberry Pi Pico C/C++ and MicroPython Demo 2.Raspberry Pi Pico Header Compatibility Onboard Female Pin Header For Direct Attaching To Raspberry Pi Pico Features At A Glance Adopts both 4-wire SPI and I2C interface, better compatibility, fast data rate Standard Raspberry Pi Pico header, supports Raspberry Pi Pico series boards Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples) Specifications LOGICAL VOLTAGE---3.3V OPERATING VOLTAGE---3.3V/5V COMMUNICATION INTERFACE---4-wire SPI, I2C DISPLAY PANEL---OLED DRIVER---SSD1305 VIEWING ANGLE--->160° RESOLUTION---128×32 pixels DISPLAY SIZE---55.02 × 13.10mm PIXEL SIZE---0.41 × 0.39mm DIMENSIONS---63.00 × 26.00mm LCD and the controller The built-in controller used in this OLED is SSD1305, which has 132 × 64 bit SRAM, supports a maximum 132 × 64 pixels screen, supports SPI/I2C/8bit 8080 parallel port. The solution of this screen is 128 × 32 pixels, so the internal SRAM is not fully used. This module uses four-wire SPI and I2C interfaces, with good compatibility and high transmission speed. Package Content Pico-OLED-2.23 x1

Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples). Adopts both 4-wire SPI and I2C interface, better compatibility, fast data rate. 128×32 Pixels 2.23inch OLED Display Module,Embedded SSD1305 Driver, Using SPI/I2C Bus. Standard Raspberry Pi Pico header, supports Raspberry Pi Pico series boards.