Testing Levels:
- pH (read first): 6.4, 6.8, 7.2, 7.6, 8.0, 8.4
- Total Alkalinity: 0, 3/54, 6/107, 10/179, 15/268, 20/357 dKH / ppm (mg/l)
- Total Hardness*: 0, 3/54, 7/125, 15/268, 28/498 ppm DH, GPG / ppm (mg/l)
- Nitrite**: 0, 0.5, 1, 5, 10, 25 ppm (mg/l)
- Nitrate**: 0, 10, 25, 50, 100, 250, 500 ppm (mg/l)
*measured as calcium carbonate
**For the nitrite test pad, the unit of measure is as nitrite, not nitrite-nitrogen. For the nitrate test pad, the unit of measure is as nitrate, not nitrate-nitrogen.
How to use:
- Dip one strip with all pads into water sample for 2-3 seconds with gentle motion.
- Remove strip and hold level.
- Wait 1 minute, then compare colour change to colour chart on the container.
General description: For semi-quantitative determinations. Detection method: colorimetric. Fast, simply dip and read indicator paper. Consists of a plastic strip with attached sealed test paper. Compare colour change of test paper with fields on colour chart provided.
Not sure which is the right water testing kit for you to compare our range of multi-pack options.
Please note: that this is a screening and can not be used to certify water as safe or unsafe for drinking. It provides approximate results ONLY when used in strict accordance with instructions. SimplexHealth expressly disclaims any liability resulting from the use of this product, failure to follow instructions, or reliance of test results. This is not a measuring instrument. Store in a cool, dry (below 32°C) place and away from excess heat and direct sunlight. No MSDS required. Keep away from children and pets. Avoid contact of test areas on strips with skin & eyes, do not ingest or expose to acids. Do not touch test pad and do not consume water which has been tested.