WatchfulEyE WTH-SG/RJ45-S x2pcs Direct in Line Plug-in Ethernet Surge Protector 2 pcs

BE SAFE

WE ONLY SOURCE

FROM OFFICIAL SUPPLIERS

From United States

To International

In 5-10 Days

US$19.99 Shipping Fees for any Order

GRAND SELECTION

Think of it and most probably we have it among our grand selection of products!

AMAZING PRICES

Get ready for the amazing and best Supps prices ever!

FIXED RATE DELIVERY

Get your order anywhere on this planet within 5-10 days with a fixed rate of $19.99 (no matter the size of your order)

+1 (844)-467 8777

PHONE:

+1 (844)-467 8777

WatchfulEyE WTH-SG/RJ45-S x2pcs Direct in Line Plug-in Ethernet Surge Protector 2 pcs

Regular Price: US$71.99

Special Price US$59.99

Availability: In stock

Supplier: WatchfulEyE

Category: Electronics Accessories & Supplies Power Strips & Surge Protectors Surge Protectors

Qty:

Standards compliance: IEC 61000-4-5, IEC61643-11, IEEE 802.3af PoE/802.3 at PoE Plus

Paperless Datasheet:

Going green and protecting environment is manufacturers' responsibility. WatchfulEye products have the links of downloading data sheet on its enclosure.

Smart Surge Protector
New Energy System
AC Power Supply System
DC Power System
Ethernet & PoE System
Data Signal & RS485 System
4~20mA Control System
Power Distribution Unit (PDU)

Surge Protector for Ethernet System

Technical Data:

WTH-SG/RJ45 Series surge protective devices are applied to surge protection for data communication systems.
WTH-SG/RJ45-S is connected in series in CAT6 network cables, compatible with 10/100/1000M Base-T Ethernet systems, protecting the equipment which are connected to the network (e.g. computers, routers, PoE devices, etc.) against damages by over-voltage surge.

Total Discharge Current (Imax @8/20µs): 0.3kA x 8 (line to GND)
Voltage protection level (Up @Line-GND): 45V @ 0.3kV (8/20)
Data Rate: 100/1000Mbps
Bandwidth (2db) per pair: >250MHz
Insertion Loss: <0.2dB @100MHz
Pairs Protected: 1-2,3-6,4-5,7-8
Protective Element: GDT, TVS
Mini & Direct in Line Plug-in


Direct in Line Plug-in Net Weight Per Unit: 5g Dimensions (W×D×H): 1.3"×0.7"×0.7"	Paperless Datasheet	Unique Serial Number	Application Ethernet System only

Application for Ethernet

What are the advantages of the GDT+TVS type surge protection? It provides a two-step surge protection mode: the first-stage GDT protection, releasing strong surge intrusion and reduce the strength of the surge; it is followed up the second-stage TVS fine protection, achieving a lower residual voltage value.
What are the advantages of 1-2, 3-6, 4-5, 7-8 line full protection mode of GDT+TVS type surge protection? If you don't know whether the system is 100M or 1000M, the full line surge protection mode of GDT+TVS avoids the confusion of your selection.
How do I determine the quantity of surge protector that I need for protecting the equipment? Surge on the STP cable will be transmitted in two directions to the ends of the cable. The surge protector A protects the equipment on the A side, such as an ethernet switch, etc. And Surge protector B protects the equipment on the B side. such as an ethernet equipment. If only the device on one end of cable needs to be protected, then only one surge protector is needed.

Is WTH-SG/RJ45-S compatible with PoE system? WTH-SG/RJ45-S is compatible with PoE system, the breakdown voltage of WTH-SG/RJ45-S on line-GND is higher than 100V; The specifications tested under PoE 57V standard: 300mA each pair line, total Max Watt on 4 pair lines is 65W.

Surge Protection Connection Diagram

Note: the stainless steel shrapnel is not connected to ground.


	WTH-SG/RJ45	WTH-SG/RJ45-KE	WTH-SG/RJ45-KH	WTH-SG/RJ45-S
DIN-rail Mounted	✓
Outdoor Installation		✓
Rack Mount			✓
Direct in Line Plug-in				✓
with Full GDT+TVS Surge Protection	✓	✓	✓	✓
Ethernet & PoE	✓	✓	✓	✓
Max Watt of PoE	90W	90W	90W	65W