Honda Acura MDX 2007-2013

Honda Acura RDX 2007-2013

FCC ID: N5F0602A1A

If you are confused about the acura mdx key fob programming, you can find the video from youtube, just enter the key words: Acura Key Fob Programming (Easy and Fast)

Step1

Gather the remote for the vehicle on hand and sit in the car with all doors/trunk tightly closed.

Step 2

Turn the original key to the ON position, marked by “II” on the ignition bezel so the dash lights come on. Then listen for a quiet click, and then within 5 seconds press the “Lock” button of new key on the remote for 1 second.

Step 3

Turn the key to the OFF position, marked by “I” on the ignition bezel so the dash lights go off. If you hear a quiet click in the dashboard after turning switch to "I" then the entire process must be restarted.

Repeat three more times (for a total of 4 times).

Step 4

Upon the 4th turning of the key to “ON”, press the lock button on one remote, the locks will make a cycling sound (clunk), locks will NOT lock or unlock at this point, they will just make a noise. The system is now in programming mode. Do not turn key off. Press lock button 2 more times, and then press unlock.

Step 5

Turn ignition completely off and remove the key. Step out of car and close door. The remotes should be programmed and work. If you have a trunk/hatch release, the button for this feature needs to be held for a few seconds before the trunk/hatch will “pop”.