This is an advanced wireless car alarm system for vehicle safety & security protection. The car alarm system include siren with built in shock sensor, car adaptor design air pressure sensor, high frequency antenna to ensure long distance working, 1-way remote control, and 2-way LCD pager remotely control. The whole installation is 5 minutes, DIY installation to save labor cost.
?Important Notice 1?
The car alarm installation is simple and easy. However, it has too many functions, pls kindly read user manual before use. Again, during usage, if you have any questions or need any assistance or need the latest user manual, pls don't hesitate to let us know. You are welcome always.
?Important Notice 2?
My siren can work at the first week, but can’t sound any more now.
Troubleshooting Operation:
Step 1: double check whether the siren is installed perfectly still, both cables has power supply.
Step 2: check the 2-way remote control setting once again, whether it's under " auto " disarm mode. Under "auto" arm/disarm mode, if the remote control is close to the car, even you shake the car, siren won't sound at all as it's disarm automatically already.
Step 3: check whether you ever press the button #, and it's under " mute" mode. If under mute mode, of course, even you shake the car, siren won't sound, only alarm to 2-way remote control.
Step 4: check 1-way and 2way remote control activation mode, both has 4 kinds of activation mode. Make sure the vibration working mode is activated and on.
Step 6: it it still can't work, pls contact with us to send you a new siren to replace it.