Clean and prep the surface

Clean the application area with included rubbing alcohol prep pad. Do not use glass cleaner as it leaves behind a residue that degrades the performance of the adhesive. If applying to an automotive window, first strip away treatments such as Rain-X with a 50/50 mixture of ammonia and water.

The preparation step is very important and will ensure proper adhesion and long life of the decal.

Prep the surface and peel the backing

Next, turn the decal face down and slowly peel the backing off of the decal and transfer tape. If any part of the decal clings to the backing paper while peeling, slowly lower it back down and apply pressure with your thumb and try again. Decals with high levels of detail may take some effort and patience to get get all of the details to separate from the backing - but your efforts will be well rewarded!

Apply the decal

Using the transfer tape, slowly lower the decal on to the prepared surface. Use the edge of a credit card or squeegee to smooth the decal into place using firm pressure.

Peel away the transfer tape

After letting the adhesive to bond to the surface for a few minutes, slowly peel away the transfer tape. This will leave the vinyl decal behind on your prepared surface.

If any part of the decal begins to pull away while applying, simply repeat step 3 and try again.