VECLESUS VT1 car wired backup camera system - Fully ensure the safety of your journey!

Warm Tips:

1. Please check the functionality of VT1 with its all accessories before installation.
2. The length of original cable for rear camera is (10M)33 feet, suitable for most types of cars.
3. please use original accessories provided in the package, just in case of compatible issues after using others.
4. Please confirm whether your cigar power port is ACC. (if the cigarette lighter is still charged after the car is turned off, please use the hardwire kit or unplug the car charger after the car is turned off, otherwise it may exhaust your car's power supply. )(Note: This happens in some Ford/Audi cars, and electric cars).

FQA:

1. Is my car suitable for installing VT1?

The VT1's monitor adopts clip-on installation design, the maximum stretching height is 80mm(3.15 in), So the minimum height of your rearview mirror should be less than 80mm. The VT1 is equipped with a 33 feet extension video cable, it enough to fit most car models. Note: The rear view mirrors of the Mini Cooper and Nissan TITAN are not suitable for installation.

2. I don't know how to install this product.

If you don't know how to install it, we recommend that you find a professional. If you want to challenge yourself, you can refer to our installation instructions and videos to install it by yourself. Any problems during installation can be solved by contacting the VECLESUS service email, wish you success!

3. Why blue or black screen?

Please check whether the voltage is between 9~24V, and confirm whether the extension cable is connected incorrectly. The end of the extension cable with the word "Monitor" must be connected to the Monitor, the other end with the word "Camera" must be connected to the camera, and the Pins of the connector need to be aligned before they are connected.

4. How to make the monitor on only when reverse ?

If the system is only used for reversing, at first, the green reverse wire must be connected to the positive pole of the reversing light to realize the reversing trigger function, and the voltage must be between +9~24V, then press the power button on the middle of the monitor to close the display, so that when reversing, the monitor will automatically light up. If the system is used for continuous viewing, please ignore this wire.

5, Why is the monitor signal intermittent or flashing?

It may be installed on some German car models (Volkswagen, Audi, BMW), the display will appear signal interruption or flash screen, just set the reverse delay setting to 2 seconds, you can solve this problem.

Installation Diagram

Installation Instructions

Monitor:

• 1) Remove the screen protector.
• 2) Clip the monitor to the rearview mirror.
• 3) Connect the car charger power cable and extension cable(the end that with word "monitor")

Camera:

• 1) Remove the original screws of the license plate.
• 2) Install the camera to the license plate and adjust the camera angle by multi-purpose screwdriver.
• 3) Connect the camera to the extension cable (the end that with word "camera")
• 4) Please note that in rare states, the length of the camera may block the expiration date in the upper right corner of the license plate, and our products may not work if explicitly prohibited by law.

Wire Connections

• 1) Use the plastic crowbar to make the wire easy to be plugged in the gap.
• 2) Connect the green reversing wire to the positive terminal of the reversing light (if you need to keep a continuous observation, just ignore this wire).
• 3) Different models have different routes to connect the camera reversing wire to the reversing light, we recommend you search for YouTube videos on how to install the backup camera on the corresponding model to refer to the installation.

NOTE: For more usage questions or accessories needed, please check the manual or consult us