USB to TTL Serial Cable Moyina USB-to-TTL (Serial) Cable 3.3V is a USB to Serial (TTL level) converter which allows the user to connect TTL interface devices to USB in a simple way Operating system support Drivers are available to download as follow: FTDI official website which allow FTDI devices to work with the following operating systems: Windows 10 32,64-bit Windows 8/8.1 32,64-bit Windows 7 32,64-bit Windows Vista and Vista 64-bit Windows XP and XP 64-bit Windows 98, 98SE, ME, 2000, Server 2003, XP, Server 2008 and server 2012 R2 Windows XP Embedded Windows CE 4.2, 5.0 and 6.0 Mac OS 8/9, OS-X Linux 2.4 and greater Android (J2xx) Installation Guides If you need further support about how to pick up and install drivers, please goes to FTDI official website, or refer to product manual See moreThe USB side of the cable is USB powered and USB 2.0 full speed compatible, while the other end is a 6 way, 0.1”, Single-In-Line (SIL) pitch gold plated connector. The length of the cable is 6ft(1.8m) and UL ‘E326510’ certified. Operating system Compatibility: Windows 10/8/7, Windows Vista, Windows XP, Windows 98, Windows ME, Linux and Mac OS. Please check for details in '' by scrolling down this page. Provides access to UART Transmit (Tx), Receive (Rx), RTS#, CTS#, VCC (5V) and GND connections. RoHS compliant and CE approved. Provides a fast, simple way to connect devices with a TTL level serial interface to USB. Support EEPROM, Vendor ID re-write and Mprog3.5; Support FTDI VCP driver and D2XX driver. Moyina USB TTL +3.3V levels (signals only, VCC= +5V) Serial cable is a range of USB to TTL serial UART converter cables featuring FTDI's FT232RL USB to serial UART interface IC device which handles all the USB signalling and protocols.