USB 3.0 Dual Monitor HDMI Switch for 2 Computers

Advantages:

• Easily have a dual monitor setup per system or switch it to a single monitor system showing both systems (one on each monitor) and then easily toggle the keyboard/mouse between the 2 systems;
• Support maximum resolution up to 4K 60Hz YUV 4:4:4, HDCP 1.4, HDR 2.2, with EDID Emulator;
• Dual monitors output support up to 4K@60Hz for extended,mirrored or spliced display(Depends on your computer's graphics card.);
• No complicated installation is required, and non-professionals can easily operate it, Ideal for multi-tasking professionals and gamers who need to access multiple devices quickly and efficiently;
• Switching modes: Buttons on the front panel and wired remote;
• The ports that need to plug in HDMI/USB cables are all hidden behind the KVM, so the desktop doesn't get cluttered;
• A USB hub can expand the USB3.0 ports if multiple connections are required, Microphones and headphones can also be connected.

Advantages of our dual-channel KVM:

Display Mode 1: Mirror/Copy Display; Extended Display; Surround/Splicing Display

How to switch:

• 1:Press the button to switch from PC1 A to output A, and frorm PC1 B to output B
• 2:Press the button to switch from PC2 A to output A, and frorm PC2 B to output B

Display Mode 2: 2 computers one-to-one corresponding display, Criss-crossing Display

How to switch:

• 3:Press the button to switch from PC1 A to output A, and from PC2 A to output B
• 4:Press the button to switch from PC1 A to output B, and from PC2 A to output A

Support EDID Lock Screen

• Dual monitor KVM switch can simulate the EDID of the display, when the monitor is switched between two computers, the original window order will not change.

Two Switching Methods

• 1. Toggle selection on front panel; 2. Wired remote switch.

SWITCH Button

• 1:Press the button to switch from PC1 A to output A, and frorm PC1 B to output B
• 2:Press the button to switch from PC2 A to output A, and frorm PC2 B to output B
• 3:Press the button to switch from PC1 A to output A, and from PC2 A to output B
• 4:Press the button to switch from PC1 A to output B, and from PC2 A to output A

installation steps:

• 1. Insert the DC/5V adapter into the KVM ;
• 2. Plug the HDMI cable into the KVM and monitor;(HDMI Output)
• 3. Plug the HDMI cable and USB cable into the KVM and your computer/laptop (HDMI cables are not included)(Input)
• HDMI IN1 A + HDMI IN1 B + USB IN1=PC1
• HDMI IN2 A + HDMI IN2 B + USB IN2=PC2
• 4. Insert the mouse and keyboard into the KVM switch
• 5. If needed, you can connect a microphone and audio port

Note:

• 1. Most of the reasons why only onevideo output works is because of incorrect connection. Please make sure eachcomputer have 2 HDMI cables connect to the KVM.
• 2. If the KVM switch does not work, you can turn off the switch on the panel and turn it on again after 2-3 seconds, and it will return to normal.