UHPPOTE Proximity RFID Card Reader 125KHz Wiegand 26/34 bits for Access Control System

BE SAFE

WE ONLY SOURCE

FROM OFFICIAL SUPPLIERS

From United States

To International

In 5-10 Days

US$19.99 Shipping Fees for any Order

GRAND SELECTION

Think of it and most probably we have it among our grand selection of products!

AMAZING PRICES

Get ready for the amazing and best Supps prices ever!

FIXED RATE DELIVERY

Get your order anywhere on this planet within 5-10 days with a fixed rate of $19.99 (no matter the size of your order)

+1 (844)-467 8777

PHONE:

+1 (844)-467 8777

UHPPOTE Proximity RFID Card Reader 125KHz Wiegand 26/34 bits for Access Control System

Regular Price: US$41.99

Special Price US$34.99

Availability: In stock

Supplier: UHPPOTE

Category: Electronics Security & Surveillance Accessories Access-Control Keypads

Qty:

Frequently bought together :

Price for all selected :

US$74.98

Wiegand Format:

The standard 26-bit Wiegand format is an open format; it is a widely-used industry standard. Almost all access control systems accept the standard 26-bit format which consists of 2 parity bits, 8-bit facility code, and 16-bit card number fields. The Wiegand interface is commonly used to connect a card swipe mechanism to the rest of an access control system.

Features:

The maximum reading distance is 6cm.
Waterproof, conforms to IP66.
It is useful for safety door system, easy to connect and use.
Ultra-low power consumption, the standby current is less than 50mA.
Support wiegand 26bits or wiegand 34bits output format.
Fast response speed, the door opening time is less than 0.3s.
This device uses high performance MCU to ensure stable performance, and low-power circuit makes the service life longer.
Widely used in factories, houses, residential quarters, offices, mechanical and electrical control equipment and so on.
The RFID card reader can't work-alone and it needs to work with Wiegand protocol access controller, such as access control panel, fingerprint device or master controller.

Specification

Working Voltage	12VDC
Static Current	=50mA
Card Type	Standard EM-ID
Transmit Frequency	125KHz
Working Temperature	-40 to +140°F
Working Humidity	10%-90%RH
Waterproof Rating	IP66
Enclosure Material	Plastic

Panel Material	PC
Enclosure Size	3-35/64" x 1-49/64" x 3/4"
Communication Distance	Less than 328ft
Lead Cable Length	9-27/32"
Status Indication	Bi-color LED + Buzzer
Wiegand Output	Wiegand 26 bit or Wiegand 34 bit (Selectable)
LED Status Indication	Red means standby, Green means activated

Package:

1 x Card Reader
1 x User Manual
2 x Plastic Anchors
2 x #7 x 1" Self-Tapping Screw

Note:

Frequency: 125Khz
Card Type: EM-ID Card (Can't support HID, Cobra, APCiK etc.)
Please notice that our wiegand reader can't be compatible with some encrypted cards, such as HID, Indala, Cobra, APCiK, Paradox, Radio, Honeywell, etc.
Can't work alone, need work with access control panel. (Please search ASIN: B00UX02JWE to get the access control panel)

Installation:

Remove the back cover from the reader
Drill 2 holes on the wall for the self-tapping screws and 1 hole for the cable
Put the supplied rubber plugs into the 2 holes
Fix the back cover firmly on the wall with 2 self-tapping screws
Thread the cable through the cable hole
Attach the keypad to the back cover

Widely used in factories, houses, residential quarters, offices, mechanical and electrical control equipment and so on. It uses high performance MCU to ensure stable performance, and low-power circuit makes the service life longer. Ultra-low power consumption, the standby current is less than 50mA. Support wiegand 26bits or wiegand 34bits output format. The RFID card reader can't work-alone and it needs to work with Wiegand protocol access controller, such as access control panel, fingerprint device or master controller.