TRENDnet TPE-113GI Gigabit Power Over Ethernet Poe Injector (Black) TRENDnet’s Gigabit PoE Injector, model TPE-113GI, combines electrical power with a Gigabit network connection. Auto-sensing technology conveniently delivers the correct wattage needed to power your PoE devices. Connect the injector to a non-PoE Gigabit switch and then run an Ethernet cable with data + power to network a PoE device up to 100 meters (328 ft.) away. PoE Supplies a PoE device with PoE (15.4W) power.HDMI Port Connect an HDMI monitor to the TUC-DS1 to add a high definition display to your workstation. Installation Flexibility Wall-mountable design accommodates most installation scenarios. Gigabit Speeds Full Duplex 2Gbps Ethernet speeds with this PoE injector. Package Contents: - TPE-113GI - Quick Installation Guide - Power adapter (54V DC, 0.4A) TRENDnet Gigabit PoE Splitter TPE-104GS TRENDnet's Gigabit PoE Splitter, model TPE-104GS, networks a non-PoE device in a remote location using a PoE network connection. The TPE-104GS splits a Gigabit PoE connection into separate power and Gigabit data sources. A handy toggle switch adjusts output power to 5 V, 7.5 V, 9 V, or 12 V in order to match non-PoE device power requirements. The included 2 and 2.5mm jumper cables increase power pin device compatibility. PoE, Compatible with PoE (802.3af ) network connections. Gigabit Ethernet, Supports Gigabit network speeds. Adjustable Dip Switch A handy toggle switch adjusts output power to 5 V, 7.5 V, 9 V, or 12 V in order to match non-PoE device power requirements. Jumper Cables, The included 2 and 2.5mm jumper cables increase power pin device compatibility with the non-PoE networked device. No Power Adapter, The TPE-104GS is powered by the PoE connection. Mounting, Built-in mounting points increase installation flexibility. TRENDnet’s Gigabit PoE Splitter, model TPE-104GS, networks a non-PoE device in a remote location using a PoE network connection. The TPE-104GS splits a Gigabit PoE connection into separate power and Gigabit data sources. A convenient dip-switch adjusts output power to 5V, 9V, or 12V in order to match non-PoE device power requirements. The included combination 2.0 and 2.5mm jumper cable provides greater device compatibility.

The injector and splitter are designed for flexible installation scenarios with long cable runs up to 100 meters (328 ft.). Full duplex Gigabit speeds with both the injector and splitter for reliable high-bandwidth connectivity. Plug-and-play installation with no configuration required for the wall-mountable injector TPE-113GI, and compact splitter TPE-104GS helps install non-PoE devices remotely. The injector TPE-113GI supplies 15.4W PoE power and auto-senses the required wattage for your PoE devices, while the splitter TPE-104GS is compatible with 802.3af PoE devices and TRENDnet PoE switches/injectors. Gigabit ports (1 x Gigabit Ethernet and 1 x PoE Gigabit Ethernet) with the injector TPE-113GI to power PoE devices up to 100 meters (328 ft.) and splitter TPE-104GS to split PoE signal into power (5/7.5/9/12V) and data sources.