Iron - Transfer Steps

1. Set Iron to High Temperature (like Cotton/Jeans Setting) and TURN OFF steam.
2. Apply FIRM, EVEN and HEAVY pressure and iron each area of the image for 3 seconds. Circularly press and iron the image. (A4 size image, press 3 minutes. 1/2 A4 size image, press 90 seconds. 1/4 A4 size image, press 45 seconds. )
3. Ensure that all areas of the image is ironed, especially the corners and edges.

NOTES:

• Apply ENOUGH pressure on the transfer as more pressure will help transfer all of the print onto the fabric.
• INSUFFICIENT PRESSURE and IRONING TIME would achieve poor transfer result - the transferred image may peel off.

Easy Press - Transfer Steps

Temperature and Time may vary based on easy heat press type and image size. Suggest you do a test before transfer onto t-shirts.

Suggest set time and temperature as below:

• A4 size image, 190?(374?), 60-70 seconds.
• 1/2 A4 size image, 190?(374?), 30-40 seconds.
• 1/4 A4 size image, 190?(374?), 15-25 seconds.

1. At first, heat press the whole image slowly from one side to the other side.
2. Apply HEAVY pressure on each area of the image for 10 seconds, circularly iron the whole image 2 times (40 seconds in total).
3. At last, heat press each corner of the image for 10~20 seconds. NOTES: If the corner peels off, cover the teflon paper(in the pack) and heat press it for another 10~20 seconds.

Heat Press Machine - Transfer Steps

• Set Temperature to 190?(374°F).
• Set Time to 10 seconds.
• Apply MEDIUM pressure.

Step 1: DRAW or PRINT

Draw or Print your design on the BLANK Side of transfer paper.

Before Printing:

• Set Paper Type to Plain Paper or Photo Paper.
• Set Printing Quality to Photo or High Quality Photo.
• MIRROR Printing is need.

NOTES: Compatible with pigment ink, dye ink and ALL brands of Inkjet printers (HP, Cannon, Brothers and more).

Step 2: CUT

Cut out your design with scissors.

NOTES:

• Trim close to the printed parts but leave a bit of a margin - 2mm.
• Don't cut so close that your design falls apart or warps while you are ironing.

Step 3: PLACE

1. REMOVE CREASES: Place your t-shirt on a SOLID surface (Don’t use ironing board as it’s too soft) and use your ironing tool to smooth out creases on shirt.
2. Place your design facing DOWNWARDS onto appropriate position of T-shirt.

Step 4: TRANSFER

Please refer to the specific operations for your ironing tool accordingly in the above figure.

• IRON - Please see IRON - TRANSFER STEPS.
• EASY PRESS - Please see EASY PRESS - TRANSFER STEPS.
• HEAT PRESS MACHINE - Please see HEAT PRESS - TRANSFER STEPS.