Torileaf 1080P VGA video+Audio Extender over Fiber

VGA fiber optic extender features:

• Using digital transmission without delay, the image is clear and the anti-interference ability is strong
• The resolution supports up to 1920×1080@60Hz
• Support one-to-many transmission through optical splitter
• Single-core optical fiber transmission, pure hardware design, no driver required, compatible with any system, plug and play
• Anti-static, lightning-proof, and strong anti-interference ability
• Automatic video adjustment

VGA Extender over Optical Fiber up to 20KM

Through a single SM optical fiber cable, the VGA video and audio signal can be extended from the near end to 20KM. You can receive the transmitted real-time signal at the far end, greatly improving work efficiency.

Connection steps:

1.Connect your source device to the Sender’s “VGA IN” port with a VGA cable;

Connect your source device to the Sender’s “Audio IN” port with a audio cables;

2.Connect an SM fiber cable to the OPT connector on the Sender unit. Plug one of the included power adapters into the DC power jack of the Sender, then plug the power adapter into any reliable power sources.

3.Connect your VGA display to the Receiver's "VGA OUT" port with an VGA cable;

Connect your audio speaker to the Receiver's “Audio OUT” port;

4.Connect the other end of the fiber cable to the OPT connector on the Receiver Unit. Plug the second power adapter into the DC power jack of the receiver, then plug the power adapter into any reliable power sources.

5.Power on all the connected devices. Now, this VGA extender is ready to use.