THINKWARE TWA-SH Hardwiring Kit Cable for Thinkware Dash Cam | Parking Mode | Impact and Motion Detection | Car Voltage Drain Protection System | Alternative Power Supply from Fuse Box

BE SAFE

WE ONLY SOURCE

FROM OFFICIAL SUPPLIERS

From United States

To International

In 5-10 Days

US$19.99 Shipping Fees for any Order

GRAND SELECTION

Think of it and most probably we have it among our grand selection of products!

AMAZING PRICES

Get ready for the amazing and best Supps prices ever!

FIXED RATE DELIVERY

Get your order anywhere on this planet within 5-10 days with a fixed rate of $19.99 (no matter the size of your order)

+1 (844)-467 8777

PHONE:

+1 (844)-467 8777

THINKWARE TWA-SH Hardwiring Kit Cable for Thinkware Dash Cam | Parking Mode | Impact and Motion Detection | Car Voltage Drain Protection System | Alternative Power Supply from Fuse Box

Regular Price: US$59.99

Special Price US$49.99

Availability: In stock

Supplier: THINKWARE

Category: Automotive Car & Vehicle Electronics Car Electronics Car Video On-Dash Cameras

Qty:

Frequently bought together :

Price for all selected :

US$99.98

Established in South Korea in 1997, THINKWARE has been a pioneer in smart vehicle technology, consistently pushing the boundaries of innovation. Dedicated to ensuring safety and reliability for every driver, THINKWARE is globally recognized for creating top-notch car cameras. With over 7 million registered users worldwide, our goal is to offer drivers an extra set of watchful eyes, providing peace of mind in unexpected situations.
BEST SELLERS
4K Dash Cams - U3000 & U1000
2K Dash Cams - Q1000 & X800
MUMU FOOD COMPOSTER & SNAP-G

Around-the-clock Surveillance for Your Car

The Thinkware Hardwiring cable enables the Intelligent Parking Surveillance feature, which captures all events surrounding your vehicle while it is parked. Available in all Thinkware Dash Cams, hit-and-run and vandalism attempts will be captured which can be used for insurance purposes.

Advanced Monitoring

The hardwiring installation allows the dash cam to automatically switch to parking mode when the ignition is off. Operating at low power consumption levels, the dash cam constantly monitors for motion and impact events.

Record Much Longer

Powered by your vehicle’s battery, Thinkware Dash Cams record for much longer than conventional dash cams equipped with rechargeable batteries, which is often hindered by the lackluster performance and short operation time. With your Thinkware dash cam hardwired, it can stay recording for much longer durations (up to 48 hours), and can be set to shut down automatically if the dash cam detects low voltage from the vehicle battery to prevent drainage.


Intelligent Parking Surveillance Mode The Parking Surveillance Mode automatically categorizes all impact and motion incidents in dedicated sensitivity settings different from the normal recording modes. Freely adjustable on their own, all sensitivity levels are enhanced to detect even the smallest door dings or a suspicious person walking around your vehicle.	Constant Monitoring When ignition is off, the dash cam automatically powers down to the lowest consumption level to maximize operating time. In true monitoring state, the camera will automatically save footage 10 seconds prior and after an event to fully capture the culprit. This sets Thinkware’s Parking Surveillance.	Intuitive Memory Partition System All Thinkware Dash Cams come with an adjustable memory partition system that is designed to maximize your recording needs. With three different settings to choose from, you can maximize the recording partition for Parking Surveillance to capture as much footage as possible without being overwritten.	Built-in Voltage Monitoring Vehicle’s voltage level is monitored and prompts dash cam to automatically shut down to prevent car battery drainage. Depending on the vehicle’s battery condition, the voltage level can be adjusted by 0.1V increments from 11.6V – 12.3V (for passenger cars), or 23.2V – 24.6V for commercial vehicles. Once the battery voltage drops below the set threshold, the dash cam automatically powers off.

THINKWARE TWA-SH is a hardwiring cable that connects to your THINKWARE dash camera directly to your vehicle’s fuse panel, which allows the camera’s parking surveillance mode to function while the vehicle’s ignition is turned off. The built-in voltage meter in the main unit will be activated to monitor the battery level. It will automatically shut off the device if the voltage dips below the configurable voltage cut-off level. One-year manufacturer's warranty: covers units sold at authorized retailers only. Disclaimer: Device is pre-loaded with a firmware and GPS data that are specific for use within the US only. Proper device operation cannot be guaranteed outside of the US.

?COMPATIBILITY?Hardwiring cable is compatible with all THINKWARE dash cams (except F550). ?CABLE LENGTH?Connecting cable is 9.8 feet (2.98 meters) long. ?AUTOMATIC SHUTOFF?Activates the built-in voltage meter in the main unit which monitors the battery level and automatically shuts off the device if low voltage is detected. ?PARKING MODE?Enables Parking Surveillance mode with impact and motion detection when the car is parked. ?HARDWIRING CABLE?Connects the main dash cam unit to the vehicle’s fuse panel (Professional Installation Recommended).