ThePoEstore PoE switch support IEEE802.3af/at POE standard, using advanced sensing algorithm, only for the terminal device which support the IEEE802.3af/at power over Ethernet standard, do not need to worry about damage to private standard PoE or non- PoE devices. Automatic recognition of PoE demand,speed, duplex and using the Auto Uplink cable, simple and convenient to use,no need to configure, plug and play. Port type: RJ45 adaptive Port rate: 10/100M Cable type: CAT5 or bett Protocol standard: IEEE 802.3 i 10 BASE-T; IEEE 802.3 u 100 BASE-TX; IEEE 802.3 x Flow Control; IEEE 802.3 af/at Power over Ethernet PoE: support IEEE802.3af/at(15.4W/30W) PoE power Supply parameters: Single port:15.4W/30W (MAX Power:65W Serials) Power supply mode: data line 1/2 (+), 3/6 (-); spare line 4/5 (+), 7/8(-) optional Power supply distance: Maximum power distance with CAT5 UTP 100meters Power: DC 52V/1.5A Working temperature: 0~55 ?; storage temperature: -20~70 ? working humidity: 10%~90%,no condensation storage humidity: 5%~95%, no condensation Warranty: One year Warranty, Free Lifetime tech Support See more

?Security intelligent power management, if the electrical equipment power exceeds the normal power output, the system will cut off power supply of the port, after 1-2 minutes, it will reexamination and power supply. ?Use TI PoE high quality chip to ensure stable operation of the product,Low power consumption, no fan design, natural heat. ?PD Detect Auto-sensing technology delivers up to 30W to an 802.3at PoE+ device with backwards compatibility for 802.3af PoE (15.4W) devices. ?PoE+ switch Each port supports auto MDI/MDIX and auto negotiation.Store and forwarding, support port isolation. ?PoE Switch,With 6 adaptive RJ45 port, 4 PoE function output port. Ideal for small installations of 4 PoE devices (IP Phone, Wired surveillance camera, Wireless Access Point).