Note:The hardware of RS485 and CAN is different. The interface can not be switched by command. Do not mix UART cable with RS485 or CAN bus, otherwise it will cause damage of MCU. Performance Operating Range : 0.1m~12m90PercentReflectivity Accuracy: ±6cm@(0.16m), ±1Percent @ (6m12m) Distance Resolution: 1cm Frame Rate: up to1000Hz(default:100Hz) Ambient Light Immunity: 70Klux Operating Temperature: 20Degree C~60Degree C FOV: 2Degree Optical Parameters Light Source: VCSEL Central Wavelength: 850nm Photobiological Safety: Class1 (EN60825) Electrical Parameters Supply Voltage: 7~30V Average Current: =65mA Power Consumption: =0.8W Peak Current: 100mA@12V Communication Interface: RS485 Hardware Spec Size: 50mmx34mmx41mm(LxWxH) Housing material: PC/ABS/PMMA Storage temperature: 30C~75C Weight: 52g Cable length: 70cm Main application scenario: Pedestrian detection Vehicle detection Intelligent barrier gate and altimeter Package Including 1 x TFminii Range Finder Module (RS485 Communication Interface) FAQ Q1: Can the FOV (spot) of TFminii be increased or decreased A1: Generally, this is a customized demand. You need to contact our colleague for further details. FOV is determined at the beginning of product design. Determination of FOV is also related to the optical system and the product structure. Therefore, it cannot be easily changed, and needs to be customized. Q2: Can I change the frequency of data output A2: Yes, customization of parameter configuration is supported in TFminii. You may consult our colleague or technical support for further details.

[Wide Application] Pedestrian detection, vehicle detection, intelligent barrier gate and altimeter,robot fall detection/Anti-Fall,Drones Obstacle Avoidance and Altitude Hold Mode, Obstacle Avoidance,Traffic Statistics, Vehicle Crash Warning. [Operation Warning] The hardware of RS485 and CAN is different. The interface can not be switched by command. Do not mix UART cable with RS485 or CAN bus, otherwise it will cause damage of MCU. [High Performance] TFmini-i accuracy can reach up to ±1% at full range distance of 12m,increg the measurement frequency to 1000Hz. The dead zone is shortened to 10 cm improving accuracy and stability. Ambient light immunity is 70Klux and central wavelength is 850nm,but it only keep 52g at weight. [Upgraded TFmini Lidar Module] TFmini-i is an updated single-point ranging LiDAR based on TFmini-S. It has been optimized in communication interface,7-30V wide range input voltage and reverse protection, making it meet different industrial applications.