Sunba 3D PTZ Controller for Analog Camera Only. NOT Compatible with IP Network Cameras.

Interface Standard: RS485
Standard Baud Rate 1200~9600bps
Joystick 3D (3 axis)
Weight 0.6KG
Dimensions: 262(L)*100(W)*42(H)mm
Power Supply: 9VDC 3W
Overpower will immediately damage the keyboard.

Joystick Connection

Attention: the joystick must be connected to the camera through RS485 Interface through twisted pair with correct +/- polarity.

A twisted pair can be a pair from ethernet cable or telephone cable.

The joystick must then be configured to the corresponding address bit of the camera (NUMBER+CAM) to gain control of the specific PTZ. Read the manual of your PTZ camera to check the current address bit of the camera.