Easily connect, power, and operate a Gigabit PoE-powered device (PD) Supplies up to 30-watts power output Flexible setup, with a desktop-sized, or surface-mountable housing Save money by using your existing Cat5 or better Ethernet cable Fast, plug-and-play setup and operation, with no configuration required Provides one PoE+ (PSE, power and data) 10/100/1000Mbps compliant RJ45 port - 802.3at and 802.3af Integrates shielded RJ45 connectors Automatically detects the powered device to provide the appropriate level of power output This Gigabit Power over Ethernet (PoE+) injector supplies power and data connectivity to a Gigabit PoE-compliant device using standard Ethernet cable, at distances of up to 100 m (330 ft.). The PoE midspan is a cost-effective alternative to upgrading your existing network switch to a PoE-capable model. This versatile PoE injector lets you connect a PoE-powered device (PD) to a non-PoE network switch, so you can avoid the expense and aggravation of replacing your existing switch with a PoE-enabled model. It supplies up to 30 watts of power, so you can easily power and access a high-power PoE-compliant device, such as an IP camera or a wireless access point (WAP), using traditional copper (RJ45) Ethernet cable. The midspan injector makes it easy to extend data and power connectivity to your PoE+ device across long distances, even in a remote location where a typical power outlet isn’t available. You can integrate this compact injector discreetly into a variety of environments. It features a surface-mountable housing that’s perfect for installing on walls or under a desk, but it’s also palm-sized, for use on desktop surfaces. Plus, with plug-and-play operation, you can enjoy fast and hassle-free setup without disrupting your workflow. Not sure which class your PoE device is? The Gigabit PoE+ injector automatically detects the power requirements of your connected PoE PD, and delivers the appropriate level of power without damaging your device. The POEINJ1G is backed by a StarTech.com 2-year warranty and free lifetime technical support. Ideal for high-power PoE+ devices requiring Gigabit speeds such as PTZ (Pan, Tilt, Zoom) cameras and Wi-Fi® access points (WAP) Enable remote installation of touchscreens, information kiosks, and phones in locations where a power connection isn’t available Perfect for small and home offices, as well as SMB applications, including system integrations, and IT administration Specifications Warranty Information Warranty 2 Years Connector(s) 2 - Connector Type(s) RJ-45 Environmental Operating Temperature 0°C to 45°C (32°F to 113°F) Storage Temperature -20°C to 85°C (-4°F to 185°F) Humidity 10~90% RH (Non-Condensing) Hardware Ports 1 Industry Standards IEEE 802.3af PoE, IEEE 802.3at PoE+ IEEE 802.3 (10BASE-T), IEEE 802.3u (100BASE-TX), IEEE 802.3ab (1000BASE-T) Indicators 1 - LED Indicators Power Packaging Information Package Height 2,4 in [61 mm] Package Length 6,0 in [15,2 cm] Shipping (Package) Weight 18,0 oz [511 g] Package Width 8,1 in [20,5 cm] Performance Maximum Data Transfer Rate 2 Gbps (Full-Duplex) Maximum Cable Length 328,0 ft [100 m] General Specifications Power Output: 48 V DC, 30 W Physical Characteristics Weight of Product 1,8 oz [50 g] Color Black Material Plastic Product Length 2,8 in [70 mm] Product Width 2,5 in [63 mm] Product Height 1,0 in [2,5 cm] Power Power Source AC Adapter Included Input Voltage 100 - 240 AC Input Current 0.75 A Output Voltage 56 DC Output Current 0. 64 A Center Tip Polarity Positive Plug Type M Power Consumption (In Watts) 36 Special Notes / Requirements Patents and Licenses The following patents are licensed for this product. This list might not be all inclusive. • United States Patent No. 5,406,260 (expired) • United States Patent No. 6,650,622 • United States Patent No. 7,457,250 • United States Patent No. 8,155,012 • United States Patent No. 8,902,760 • United States Patent No. 8,942,107 • United States Patent No. 9,019,838 • United States Patent No. 9,049,019 • United States Patent Application No. 14/695,456 • United States Patent Application No. 14/726,940 System and Cable Requirements If your connected devices do not meet the IEEE 802.3af or IEEE 802.3at PoE standard, then the POEINJ1G will not inject power to the connected device(s) / Ethernet cable(s) What's in the Box 1 - Included in Package POE+ Injector Power Adapter Instruction Manual 4 - Included in Package Mounting Screws Power Cords (NA/UK/EU/ANZ)

Wall-mountable enclosure. Power devices in remote locations. Convert an Ethernet port to a PoE+ or PoE port. Use with IP security cameras and IP phones / Wireless access points in a home office or small business. Power over Ethernet Injector / 802.3at / 802.3af / 1000Mbps High-Power PoE Injector Adapter / PoE/PSE Power over Ethernet Adapter. Compatible with Cisco Aironet 2600 Series Access Points. Supply power and data connectivity to an individual Gigabit PoE device over Ethernet cabling. 802.3at and 802.3af. PoE+ Injector. 1 Port Gigabit Midspan. Compatible with Cisco Aironet 2600 Series Access Points. Supply power and data connectivity to an individual Gigabit PoE device over Ethernet cabling.