Installation Instructions
1. Please slid to open and take the middel frame out of the enclosure.
2. Place the SSD at and angle of 45 degress into the PCB.
3. Insert the fixing hole at the end of the M.2 SSD into the slot in the middle of screw B, insert screw A and tighten it. Otherwise, there will be large screws preventing the installation of the enclosure.
4. Put the thermal pad on the SSD,leave the sheet on the thermal pad.
5. Inserting in the direction of the arrow,the end with the hook goes slowly slide into the shell first. When you hear a bang, it means that it is locked
Note:
1. It supports SATA-based B Key (B+M Key) SSD only. It does NOT support PCI-E based M key and M+B key SSD; If need NVME PCIE based SSD Enclosure, pls purchase another model HE-C325 SHE-C326 from our Store. Thank you!
2. It is also not compatible with MacBook original SSD.
3. After installed, when the first time to use the new SSD, it may not be found, please partition and format it first under disk management, then it can be used normally. If want to work on both Mac and Windows OS, please format it to EXFAT.
Thank you for your attention!
