Pay attention:

• Sinocare Safe AQ UG Blood Glucose Test Strips are only compatible with sinocare Safe AQ UG Blood Glucose and Uric Acid Meters, not for other types of blood glucose meters.
• Affected moderately by the environment humidity, the measured value will fluctuate by 15%, which is normal. Pls try to store the test strips in an environment with a humidity <80% to improve accuracy. Please don't store this blood glucose kit where it's too hot or too cold.
• Better to complete the test within 3 minutes after the strip is taken out, or it may be invalid.
• When opening the bottle for the first time, write down the opening date on the label of the bottle (the validity period after opening is 6 months), and the test strip must be used within the validity period.
• After taking out the test strip, the bottle cap should be closed immediately to prevent the test strip from being damp or oxidized.
• Adhesion of the test strip is a normal phenomenon and will not affect your normal use.
• Keeping your fingers clean, please use 75% alcohol cotton pads for disinfection. Do not use iodine or disinfectant. Don't sterilize repeatedly, wait for the alcohol to evaporate.
• It is necessary to complete the blood-sucking process at one time. If the blood is not full at one time, please do not add blood samples, just replace them with new test strips for testing.
• When the meter starts testing, do not move the test strip and do not press any buttons of the meter.
• Results from alternative sites don't reflect your current blood glucose level.
• The test strips are for individual use only. Never reuse a test strip that has applied blood.