Use the Seco-Larm Enforcer HDMI Extender with KVM, 1080p to extend the range of HDMI signals by sending video and audio over a single Cat6/7 cable. This device will allow you remote operation of a device, such as a computer or NVR/DVR, from one end of an installation to the opposite end with zero latency transmission over a single Cat6/7 cable (up to 230 feet). It also transmits USB 2.0 signals and supports point to point connections and KVM functionality, which provides a way to control multiple computers from a single keyboard, mouse, and monitor. It features lighting protection, surge protection, and ESD protection, all of which ensure your electronic devices will be safe and well protected against possible surges and electromagnetic energy that could cause damage. Input Video Signal: 3.3V. Input DDC Signal: 5Vp-p (TTL). Maximum Signal Link Range: 230ft (70m). Video Formats Supported: High-speed HDMI, HDCP 1.4. Audio Formats Supported: PCM, LPCM, DTS-HD, DTS-Audio. Output Video: HDMI. Resolutions Supported: 1080p,1080i, 720p, 576p, 576i, 480p, 480i, 1920x1080, 1680x1050, 1440x900, 1366x768, 1280x960, 1280x720, 1024x768, 800x600. Range (Cat6/6A/7): Up to 230ft (70m). Video Input Connector: HDMI Type A 19-pin female. Maximum Input Cable Length: 26ft (8m) AWG24. Video Output Connector: HDMI Type A 19-pin female. Maximum Output Cable Length: 26ft (8m) AWG24. Cat6 Wiring Standard: T-568B. Operating Voltage: 5VDC. Power Supply: 5VDC@1A. ESD Protection: ±8kV (air-gap discharge), ±4kV (contact discharge). Current Draw: Transmitter & Receiver: <2.5W. Operating Humidity: 0 to 90%. Operating Temperature: -4 to 140 degrees F (-20 to 60 degrees C). Dimensions: 2-15/16 x 3-3/8 x 3/4 inches (74x85x19 mm). Weight: 6.3-oz (180g). Credentials: FCC, CE, RoHS. Warranty: 2 Years. Supports HDMi loop-out. Contents: HDMI Transmitter, HDMI Receiver, USB Cable, (2) Power Adapters, and Manual. Manufacturer Part #: MVE-AH1E1-01UQ.

Status LEDs indicate power and KVM status. Includes Power Adapter and IR hardware. Supports HDMi loop-out and KVM functionality. Supports resolutions from 800x600 to 4K@60Hz with zero signal loss. Extends HDMI and USB 2.0 signals up to 230ft over a single Cat6/7 cable. Status LEDs indicate power and KVM status. Includes Power Adapter and IR hardware. Supports HDMi loop-out and KVM functionality. Supports resolutions from 800x600 to 4K@60Hz with zero signal loss. Extends HDMI and USB 2.0 signals up to 230ft over a single Cat6/7 cable.