After installation, my display can’t touch well /phone can’t unlocked/ has screen line.

• 1. Please use the FPC connector to connect Main board again,make sure the connector was tight and connect on the right position.
• 2.Please check the middle frame whether didn’t clean up, and it still have foreign matter.
• 3.Whether it didn’t pay attention to the length of the screw, the screw may installed backwards to resist the LCD display.

My phone can’t turn on, all the screen are black/white/blue. What should I do?

• 1. Please check the connector whether out of shape.
• 2.please use the FPC connector to connect Main board again,make sure the connector was tight and connect on the right position.
• 3.Press the volume down button and the power button for 50-60 seconds to restart.

Do you have any suggestion?

After finished the installation, in order to make the display fit completely with the frame, please use the rubber band to fix the display for 3-4 hour.(We do not provide for rubber band )

Please Test Before Installation and Take Care Of The IC Part

• 1.Please test before installation and put the bubble bag back on the display to test. Avoid problems caused by static electricity.
• 2. Please DO NOT touch the IC part during installation and DO NOT press the IC part too hard. The IC part is easy to damage, it will have caused the problem of non-sensitive touch / screen line / black screen, etc.