Revotech 1 Port POE Extender IEEE 802.3af Standard 10 100Mbps 100m(328 ft) POE Repeater for POE IP Camera Over Cat5 or UTP Cables(POE5002) 1 Port POE5002

BE SAFE

WE ONLY SOURCE

FROM OFFICIAL SUPPLIERS

From United States

To International

In 5-10 Days

US$19.99 Shipping Fees for any Order

GRAND SELECTION

Think of it and most probably we have it among our grand selection of products!

AMAZING PRICES

Get ready for the amazing and best Supps prices ever!

FIXED RATE DELIVERY

Get your order anywhere on this planet within 5-10 days with a fixed rate of $19.99 (no matter the size of your order)

+1 (844)-467 8777

PHONE:

+1 (844)-467 8777

Revotech 1 Port POE Extender IEEE 802.3af Standard 10 100Mbps 100m(328 ft) POE Repeater for POE IP Camera Over Cat5 or UTP Cables(POE5002) 1 Port POE5002

Regular Price: US$41.99

Special Price US$34.99

Availability: In stock

Supplier: REVOTECH

Category: Electronics Computers & Accessories Networking Products Switches

Qty:


	POE5002	POE5003	POE5004	POE5003-G
Data Speed	10/100Mbps	10/100Mbps	10/100Mbps	10/100/1000Mbps
PoE input	1 RJ45 port (DC 44-57V)	1 RJ45 port(DC 48-57V)	1 RJ45 port(DC 48-57V)	1 RJ45 port(DC 48-57V)
PoE output	1 RJ45 port	2 RJ45 port	4 RJ45 port	2 RJ45 port
Input power	13 Watts	30 Watts Max	30 Watts Max	30 Watts Max
Output power	12.2 Watts	15 Watts Max	15 Watts	15 Watts Max
PoE Standard	IEEE 802.3af	IEEE 802.3af/at	IEEE 802.3af/at	IEEE 802.3af/at
Dimension	75x37x26.5mm	88x44x22mm	105x93x28.5mm	88x44x22mm
Weight	60g	52g	200g	52g

Specification

Network Medium	Cat5 or better UTP cables (less than 100m)
Repeater Mode	Store and forward
MAC Address Table	2K
Packet Buffer Memory	48 Byte
Switching Capacity	400Mbps

Power Supply Type	1/2+,3/6-,Mode A, End-Span
Network Protocol	IEEE 802.3i-10BASE-T, IEEE 802.3u: 100BASE-TX, IEEE 802.3x-Flow Control, IEEE 802.3af-Power over Ethernet
Storage Humidity	5%~90%, No Condensation
Operating temperature	-10~45?

POE Extender additional 100 meter distance

PoE Extender is a cost effective way to extend the Ethernet network range beyond 100m, delivering both data and power to network devices such as WLAN Access Points and Network Cameras up to a distance of 200m while complying with IEEE PoE and Data standards.


1 RJ45 input port The green indicator light is always on and the yellow indicator flashes. This means that it is working properly.	2 port POE output One network cable to connect one/two/four POE IP devices	Plug & play Powered via the PoE input, Plug and Play. Automatically detects and protects PoE equipments from being damaged by incorrect installation.

Note:

1. This Extender is not a PoE Switch, it can not work without powered from PoE Switch/PoE injector/PoE NVR.

2. Please don't place any heavy thing on the PoE extender;

3. To prevent the water seeping into the extender, please keep PoE extender away wet environment;

4. Suggest to use PoE extender indoors. When installing the extender in outdoor please install it in a waterproof place.

1 Port PoE extender can forward both Ethernet and PoE power for 1 terminal equipment via Cat5 ,Cat5e,Cat6,Cat6e,UTP cable(less than 120m). Plug and Play no configuration required, easy to use. Automatically detects and protects PoE equipment from being damaged by incorrect installation. Extender the range of PoE an additional 100 meters(328 ft), Extenders can be cascaded to reach up to 700m in cascade(6 pieces). Comply with IEEE 802.af Power over Ethernet (10/100Mbps Supported), and delivers 802.3af power levels, up to 15.4W.