How to customize keyboard RGB lighting?
(1) ON/OFF key ( next to FN key):Turn on / off. (2)FN + += : Speed up. (3) FN + _ : Slow down. (4) FN + PgUp : Brightness+. (5) FN + PgDn : Brightness-.(6) FN + 1 :Streamer mode. (7) FN + 2 : Neon mode. (8) FN + 3 : Breathing mode. (9) FN + 4 : Gradient mode. (10) FN + 5 : Switch light color.
Note
1. The USB receiver is located on the bottom of the mouse, and the keyboard and mouse only share only one USB receiver to reduce the number of USB ports. (The keyboard and mouse lights will light up only when the USB dongle is plugged in).
2. Please fully charge it before the first use, otherwise it will not last as long as expected when it is not fully charged. (Because we didn't fully charge the keyboard/mouse before shipment to ensure transportation safety).
3. The mouse supports wired and wireless dual modes: If your mouse needs to be charged while using, please charge the mouse through the USB port of the device you are using, in which case the mouse is in wired mode.
4. No software installation is required before the first use, just plug the USB receiver into the USB port, turn the switch at the bottom of the keyboard to the ON position, and turn the switch on the bottom of the mouse to the ON (no light) or LED (with light) position.
5. There will be a little delay or the lights will not turn on when the keyboard/mouse battery is too low, please charge the keyboard/mouse in time, the charging indicator will go off after full charge.
6. To protect battery life, please use a lower than DC:5V adapter to charge, preferably using the computer's USB port to charge directly. Due to the different currents of different computer USB charging ports, some users may need longer charging time to fully charge.
7. Turning off the keyboard light can extend the battery life of the keyboard moderately.
8. If you can't press "WASD" or " ", don't worry, please check if the FN function key is enabled. FN+ "W" key can be used to switch between letter "WASD" keys and arrow " " keys at will.
9. If the keyboard/mouse is not working, they may lose connection with the USB receiver. Please try pairing with the USB receiver again. Pairing steps as following: Make sure the keyboard/mouse fully charged and re-pair with the USB receiver. Mouse pairing steps: Step 1: Turn the switch at the bottom of the mouse to the switch position with the sun logo; Step 2: Press and hold the mouse wheel and right button, the mouse RGB lights start to flash; Step 3: Insert the USB receiver into the computer and the pairing is complete. Keyboard pairing steps: Step 1: Turn on the keyboard switch; Step 2: Press and hold the ESC key and the K key at the same time, the indicator light starts to flash; Step 3: Insert the USB receiver into the computer, and pairing is complete.
10. If you have any problem, please tell us on Amazon at the first time, we will try our best to solve it.
