PACKAGE INCLUDING: A. 7 INCHES WIRED SINGLE VIEW MONITOR X1 B. AHD 720P WATERPROOF CAMERA X1 C. 49FTETERS EXTENSION CABLE X1 D. MONITOR POWER CABLE X1 MONITOR SPECIFICATION: 7 Inch Wired Color Single View AHD monitor Resolution: 1024(RGB)*600 TV System: NTSC/PAL Multiple menu languages Brightness;450cd/m2 Support 3 cameras video input Separate trigger control wires forAV1,AV2,AV3. Menu to set up reversing image delay time 0-15s, mirrorrmal image. Monitor will automatic switch-over the image to related camera and back to the original mode when the trigger stops. In standby mode, monitor will turn on automatically when triggered and will switch to back up camera image,Trigger end after shutdown Working voltage: DC12V to 36V Keys with LED backlit Built-in short-circuit protector(When installing and connecting the kit, people connects the female 4 pin connectors to the male one from the camera and monitor, they sometimes connect the video pin of the camera to the power pin of the monitor. It may cause a shortcut, the builtin protector may keep the monitor away from being burnt.) ?Guide line appears when it is set as ON and monitor is triggered by the trigger wireCAMERA SPECIFICATIONS: sensor:SONY AHD 720P Video format:NTSC optional Lens:2.5mm Lens Angle: 120 degree Infrared LED light: 18PCS IR Distance:35ft Waterproof Rate:IP69K, Housing:aluminum alloy (camera never gets rusty, and has a higher ability in heat radiation than iron housing.) Dustproof, waterproof, hydrochloric acid prevention, explosion preventionConnector Type: Four-Pin Aviation Connector. ?Easy To Connect?This System Has No Different Types Of Connectors. All Of Them Are 4-Pin Connectors, You Just Need To Plug Them Together One By One In Sequence. Then Power It By Rear Lamp, It Works. ?Normal/Mirror Image?The Image Can Be Rotated By Buttons On Monitor. It Allows The Camera To Be Mounted In Any Directions, Up-Side-Down Or Horizontally,Just Press The Button To Get A Right Image On The Monitor. ?Heavy Duty Camera?Camera Comes With The Ip69K Waterproof Rating, And 10G Vibration-Proof Rating. These Ensure The Camera Work Well In Extreme Conditions. With 12 Ir Lights, The Driver Also Can See Clearly What Is In The Blind Spots At Night Or When The Ambient Light Is Low. ?High Definition Monitor?7'' Hd 720P Monitor(Not Split) Provides Super Clear Image. It Has Free Power Input Range Dc12-32V. And It Takes Up To 3 Cameras. Monitor Can Be Automatically Activated By The Trigger Wire To Display The Camera When Reversing. After Reversing, It Goes Back To The Original Mode. It Not Only Can Be Used For Reversing, But Also Can Be On All The Time. A Short-Circuit Protector And A Tvs Device Are Built In To Keep The Monitor From Being Damaged. ?7'' One-Camera Kit? This Is A Wired 7'' Backup Camera System With A 49Ft Extension Cable. It Is Designed Solely To Assist The Driver By Improving Visibility And Reducing Known Blind Spots. It Can Be Used For Trucks, Vans, Mini Buses, Forklifts, Skid Loaders, Excavators, Farm Equipments, Motorhomes, Rv, Campers, Etc.