Pyle Model : PLMRKT4A MARINE AMPLIFIED SPEAKER SYSTEM 4 CHANNEL WATERPROOF MP3/ IPOD AMPLIFIED 6.5'' MARINE SPEAKER SYSTEM Two Pair 6.5'' 2-Way Marine Speakers: * 6.5'' High Quality Polypropylene Cone * Suspension Cloth Surround * White Plastic Enclosure * 2'' Polymer Cone Tweeter * 200 Watts RMS / 400 Watts Peak * Frequency Response: 80-20KHz * Impedance: 8 Ohms One Piece PLMRMP3A 4 Channel Waterproof Marine Power Amplifier * 4 x 100 Watts RMS at 4 Ohms * 4 x 200 Watts Max at 4 Ohms * 4 x 300 Watts RMS at 2 Ohms * Electronic Crossover Network * 2 Ohms Stereo Stable * Anti-Thump Turn-On * Soft Turn On/Off * Adjustable High Low Level Inputs * RCA Line Input * Power Protection Circuitry * Volume Gain Remote Control * T.H.D: <0.05% * S/N Ratio: >95dB * Channel Separation: >65dB * Frequency Response: 10Hz- 40kHz * Fuse : 10A * Dimensions:6.10''L x 3.35''W x 1.38''H * Color: Silver Accessories: * iPod / MP3 Waterproof Poly Bag * iPod / MP3 Waterproof 3.5mm Stereo to RCA Adaptor * Remote control for Volume Gain This Pyle marine speaker system has everything you need to blast tunes at sea It comes with two pairs of 6.5' two-way speakers, 4-channel waterproof power amp, waterproof iPod/MP3 adaptor, and a waterproof poly bag. The speakers are constructed from high quality polypropylene cones, boasting 200 watts peak power and a white plastic enclosure. The PLMRMP3A amp pushes 200 watts max on each channel, so you know your speakers are well-matched. The amp also includes an electronic crossover network should you choose to expand your speaker system. The amp takes high and low level inputs, as well as an RCA line level input - so you can hook up your MP3 player using the included MP3 adaptor. And when things get wet, keep it safe in the included waterproof poly bag. Also includes a wired remote control for total control of your music from another spot on your vehicle. FROM THE MANUFACTURER 4-Channel Marine Speaker System with Amplifier Click here for a larger image Waterproof Poly Bag Keeps Your Devices Dry Click here for a larger image Hydra Series Amplifier Click here for a larger image 4 Speakers Included: 6.5" Dual Cone Marine Speakers Click here for a larger image Wiring and Controls Diagram Click here for a larger image Accessory Cables Included Click here for a larger image TAKE YOUR MARINE AUDIO TO THE NEXT LEVEL The Pyle PLMRKT4A is a 4-Channel Marine Speaker System with amplifier designed for custom installation applications and makes it simple to expand the audio system capabilities for your vehicle - perfect for your boat, ATV or RV. The Hydra Series Amplifier System is a great kit to start your marine audio system. It includes a 4-channel, 400-watt amplifier with tons of features, plus a total of (4) 6.5" 200-watt two-way speakers for rich, full-bodied audio. Also included are accessories to further enrich your marine audio experience, including remote volume control, 3.5mm stereo to RCA cable, and a waterproof poly bag for protecting your audio player from the elements. PLUG IT IN This amplifier kit comes with a waterproof poly bag with 3.5mm jack so you can enjoy playing your favorite audio files from your iPod/MP3 player while keeping your device protected. The system includes RCA line inputs and the kit comes with a 3.5mm-to-RCA adaptor so you can connect your device through the poly bag. Additionally, you can also connect standard high and low level inputs from a marine head-unit or car stereo/radio. POWERFUL 4-CHANNEL AMPLIFIER The included amplifier provdes up to 400 Watt MAX power (200 Watt power on each of the 2 channels) -- plenty of power to get the boat rocking. The amplifier is also equipped with an electronic crossover network, adjustable high/low level inputs, and stereo RCA line-level inputs. The wired remote control allows you to adjust the amplifier gain easily -- no need to get the screwdriver every time you want to raise or lower the volume. Plus, it mounts to your dash for a clean, professional look. A PAIR OF WATERPROOF MARINE SPEAKERS This kit includes a pair of 6.5" two-way marine speakers finished a pristine marine white -- the perfect addition to your boat's decor. Each speaker contains a high-quality polypropylene cone and 2" polymer cone tweeter for deep lows, rich mids, and sweet highs. With 200 watts of maximum power at 4 ohms, these speakers are perfectly matched with the included amplifier. FINE-TUNE YOUR AUDIO The switches and gain settings are located behind a watertight plug, which also lights up when the amplifier is on. Customize your audio settings and make it sound just the way you want. Make adjustments to: * Input Level: Set the input sensitivity of the amp. If you are connecting to a LINE level source (typically an RCA type connection) then the switch should be in the LINE (out) position. When connecting to speaker outputs, headphone, or car radio sources then set the switch to the SPEAKER position. * Polarity: This switch allows the user to optimize bass performance in the case that there are more than 1 set of loudspeakers producing bass in the system. Play some music with strong bass content and listen with the switch alternately in the NORMAL and REVERSE position until it can be determined which settings results in more pleg bass response. * Gain Control: Adjusts the overall level of the amplifier. When using the amp without volume control, the level should be set to achieve a balance with other loudspeakers in the system. As a rule, you should keep the gain settings as low as possible while still ensuring that the system will reach its full output power. * Volume Control: Plug for the waterproof remote volume control. When installed, this control will power off the amp when turned all the way down * RCA Stereo Input: Connect external audio devices like an iPod or just about any other MP3 player. CUSTOM INSTALLATION Built-in mounting brackets and included hardware allow for easy and convenient installation. Attach the amplifier to a compartment or panel with just a few screws. BUILT-IN SAFETY This amp is equipped with power protection circuitry and soft turn on/off preventing damage to your speaker equipment. ACCESSORIES INCLUDED Kit comes with 4-channel waterproof marine amp, iPod/MP3 waterproof 3.5mm stereo to RCA adaptor, remote control for volume gain and waterproof poly bag. ADD SOME POWER With any quality marine audio system, you will need an amp to power your high powered marine audio system. With the Hydra Series Amplifiers you will have all the power you need to run even the highest rating marine system. All Pyle Hydra amplifiers are specially engineered for marine applications. 2-WAY MARINE SPEAKER FEATURES * Impedance: 4 Ohms * 2'' Polymer Cone Tweeter * 6.5'' Polypropylene Cone * Cloth Surround Suspension * Frequency Response: 80-20KHz * 100 Watts RMS / 200 Watts Peak ADDITIONAL FEATURES * 4 x 100 Watts RMS at 4 Ohms * 4 x 200 Watts Max at 4 Ohms * 4 x 300 Watts RMS at 2 Ohms * Fuse: 10A * RCA Line Input * T.H.D: <0.05% * Soft Turn On/Off * S/N Ratio: >95dB * Anti-Thump Turn-On * 2 Ohms Stereo Stable * Power Protection Circuitry * Channel Separation: >65dB * Volume Gain Remote Control * Remote Control for Volume Gain * Converter: High Low Level Inputs * Frequency Response: 10Hz - 40kHz * Dimensions: 6.10'' L x 3.35'' W x 1.38'' H MORE MARINE SPEAKER & AMPLIFIER KIT OPTIONS: PLMRKT2A PLMRKT2B PLMRKT4A PLMRKT4B

Also accepts standard high- and low-level inputs from marine head units. Accepts RCA line inputs and includes a 3.5mm-to-RCA adaptor so you can plug in your MP3 player or iPod easily. Two-way speakers feature 6.5-inch woofer with polypropylene cones and suspension cloth surrounds; two-inch poly cone tweeters. Marine amplifier delivers 4 x 100 Watts RMS at 4 Ohms, 4 x 200 Watts Max at 4 Ohms, 4 x 300 Watts RMS at 2 Ohms. Complete marine audio solution includes Pyle PLMRMP3A power amplifier, two pairs speakers, cable and waterproof poly bag for iPod/MP3 player. Included Components: 1 Pyle Branded Product. POWER PROTECTION CIRCUITRY: Pyle marine amplifier features power protection circuitry, and soft turn on/off that prevents from damaging your speaker equipment. Built-in mounting brackets and includes hardware for convenient installation. VOLUME GAIN CONTROL: The gain control adjusts the overall level of the amplifier and achieves a balance with other loudspeakers in the system. The waterproof remote volume control will power off the amp when turned all the way down. BAG AND 3.5mm JACK: Pyle amplifier kit comes with a waterproof poly bag with 3.5mm jack stereo to RCA adaptor from your iPod/MP3 player to protect the device. You can also connect standard high and low-level inputs from a marine head-unit receiver. 4 MARINE SPEAKERS: This kit includes two pair of 6.5" two-way marine speakers finished a pristine marine white. Each speaker contains a high-quality polypropylene cone and 2" polymer cone tweeter for deep lows, rich mids, and sweet highs. POWERFUL 4-CHANNEL AMPLIFIER: The included amplifier provides up to 400-watt max power at 8 ohms on each channel. It also contains an electronic crossover network, adjustable high/ low-level inputs, and stereo RCA line-level inputs.

Special Feature: Waterproof. Connectivity Technology: Auxiliary. Speaker Type: Surround Sound. Model Name: PLMRKT4A. Brand: Pyle. : B003GSLDUY. Manufacturer: Sound Around. Date First Available: April 6, 2010. Department: Electronics. Item model number: PLMRKT4A. Product Dimensions: 15.59 x 7.99 x 7.76 inches; 1.1 Pounds. Is Discontinued By Manufacturer: No.