Pyle Model : PLMRA620 ELITE SERIES MARINE 6-CH. AMPLIFIER ELITE SERIES WATERPROOF AMPLIFIER, BRIDGEABLE 2000 WATT 6-CHANNEL AMP Features: * Bridgeable Audio Amplifier * Tri-Mode Configurable * 6-Channel Amp System * 2 Ohm Stereo Stable * MOSFET Power Supply * Marine Grade Construction * Waterproof Marine Rating IP-01 * Hi/Lo Electronic Crossover Network * Adjustable Input GAIN Level Controls * RCA (L/R) Input Connector Jacks * Variable High Pass, Low Pass & Bass Boost Controls * Remote Bass Boost Controller Connector Jack * Gold-Plated Speaker Output Terminal Connectors * Anti-Thump Delay Circuitry * Power & Protection LED Indicators * Built-in Thermal, Overload & Speaker Short Protection * Heavy Duty Aluminum Alloy Heatsink * Remote Turn ON/OFF Technical Specs: * 4 x 100W + 2 x 250W RMS @ 4 Ohms * 4 x 250W + 2 x 500W MAX @ 4 Ohms * 4 x 175W + 1 x 400W RMS @ 2 Ohms * 2 x 400W + 1 x 900W MAX @ 4 Ohms Bridged * Amplifier Class: AB * Fuse Type: 40A x 2 * Frequency Response: 15 - 30kHz * Input Impedance: 10k Ohm * Input Sensitivity: 250mV * Variable Bass Boost: 0 +/- 18dB @ 60Hz * S/N Ratio: >95dB * T.H.D.: <0.04% * Power Supply: DC 12V * Dimensions (L x W x H): 19.6'' x 10.9'' x 2.7'' The Pyle Elite Series Amps provide waterproof power for all of your speaker needs. The marine grade waterproof construction and high-power efficiency ratings provide performance and reliability -- rain or shine! These multi-channel amplifiers are perfect for the backyard, boat or even by the pool! Additional features include MOSFET power supplies, built-in electronic circuitry protection, heavy-duty aluminum heat sinks and more. Enjoy versatile waterproof performance and next level sound amplification with the Pyle Elite Series Amps. (Models: PLMRA200, PLMRA400, PLMRA420, PLMRA620, PLMRA820).

Variable Hi/Lo Electronic Crossover Network (CH1 / CH2 and CH3 / CH4) - Gold RCA Inputs - Low and High Pass Filter Controls (CH3 / CH4). 4 x 175W + 1 x 400W RMS at 2 Ohms - Protection LED Indicator - Tri-Mode Configurable. 2 x 400W + 1 x 900W MAX @ 4 Ohms Bridged - Power ON LED Indicator - Soft Turn On/Off - Dimensions: 10.9''W x 2.7''H x 19.6''L. 4 x 250W + 2 x 500W MAX @ 4 Ohms - 2 Ohm Stereo Stable - Blue LED Level Display - Thermal / Overload / Short Circuit Protection. 4 x 100W + 2 x 250W RMS @ 4 Ohms - Variable Bass Boost (CH5 / CH6) - Remote Bass Boost - Variable Input Level (Gain) Control. RCA STEREO INPUT: For an easier use of this hydra marine amplifier, it comes with premium RCA inputs. If your marine receiver lacks RCA output jacks, you can connect speaker output leads to the high-level terminal inputs. POWERFUL 2000 WATT: This amplifier receiver is powerful with its 2000 WATT MAX and dual MOSFET power supply. Comes with dual adjustable input GAIN level controls between 4 to 8 Ohm speaker impedance. SHORT PROTECTION: Built with a heavy duty Aluminum Alloy heatsink, thermal overload speaker short protection and LED light indicator. These are to protect the amp and your vehicle's electrical system from short circuit conditions. WATERPROOF & WEATHERPROOF: The audio amplifier is waterproof with its marine grade rating of IP-01. It’s constructed with gold-plated stereo speaker output terminal connectors to combat weather corrosion with long-term us. 6 CHANNEL BRIDGEABLE AMPLIFIER: Pyle’s PLMRA620 is engineered as a 6 Channel bridgeable marine amplifier that powers up your speaker and is universally compatible. It has a bridge mode selection switch and high or low electronic crossover network.

Number of Channels: 6. Brand: Pyle. Manufacturer: Pyle. Voltage: 12 Volts. Item Dimensions LxWxH: 25.2 x 13 x 4.3 inches. Date First Available: September 14, 2004. Best Sellers Rank: #39,507 in Electronics. Customer Reviews: 3.8 out of 5 stars 94 ratings 3.8 out of 5 stars. : B000N5T0TE. Wattage: ?2000 watts. Voltage: ?12 Volts. Manufacturer Part Number: ?PLMRA620. Is Discontinued By Manufacturer: ?No. Item model number: ?PLMRA620. Product Dimensions: ?25.2 x 13 x 4.3 inches. Item Weight: ?10.49 pounds. Model: ?PLMRA620. Brand: ?Pyle. Manufacturer: ?Pyle.