How It Works

Includes Easy-to-Follow Instructions

1. Clean and dry denture thoroughly.
2. Pour liquid into plastic conainer of powder and mix with enclosed stirring stick.
3. Stir thorougly for 10 seconds.
4. Allow mixture to gel until it becomes the consistency of honey. Check consistency with stick every 10 seconds.
5. Pour ProSoft Denture reliner into denture base.
6. Rinse mouth with water and insert denture into your mouth. Bite down for 3 minutes. This will take the impression of your gums.
7. Remove relined denture from mouth.
8. Check to see if all areas are covered.
9. Place denture in a cup of cold water for 3 minutes.
10. Trim excess material with a sharp knife. Finished!

Cleaning and Maintenance of ProSoft Denture Liner

• To clean relined denture, brush denture teeth as you regularly do and gently brush the liner.
• You can soak in effervescent tablets after 3 days for 5 minutes at a time.
• Soak in a cup of plain water at night.

Removal of ProSoft Denture Reline Kit from Denture

1. Run hot tap water over the edges of the liner to loosen the bond.
2. Gently pull back liner by utilizing tweezers and pulling back slowly.
3. Repeat the process using hot water and tweezers until all of the reliner is removed.

**If you plan to reline with ProSoft again after removal, don't worry if you don't get all of the material out of the denture. ProSoft adheres to itself and you can add more to it.