Time setting (SET) - 1.Press and hold "SET" button for "3" seconds to enter the "time" setting. Press the "SET" button to set the hour, minute, year, month and day in turn, press the "SET" button once to confirm the setting. - 2.Press the "UP" and "DOWN" button to set the desired value in the sequence. - 3.Hold the "UP" or "DOWN" button to speed up the selection process. - 4. Press the "SET" button after setting the date to return to the time display mode. - Note: The "SET" button is the confirmation button for each setting function. | Music setting (SOUND) - 1.Music Turn on or off- Press the "SOUND" button once to turn on the music, 4 songs will start to play in a loop, then press the "SOUND" button to switch the music, when you switch to the 4th song, press the "sound" button to turn off the music. - 2.Selecting Music and Music Timing-Press and hold the "SOUND" button for "3" seconds to enter the "music" setting,the default 30 minutes, the music icon blinking, press once The "SOUND" button switch music, the current music single loop, do not press the "SOUND" button is the sequence of play. Press "UP" or "DOWN" button music timing, music timing 1-60 minutes range setting, press "SET" button once to confirm the setting. - 3.Music Icon Display-When the music is turned on and no timing is set, the music icon lights up. When the timer mode is set, the music icon blinks. - 4.Volume Adjustment-After the music is set, you can press "UP" or "DOWN" button to adjust the music volume, volume adjustment range: 1-15. | Light projection setting (LIGHT) - 1.Projection Turn on or off-Press the "LIGHT" button once to turn on the light, press the "LIGHT" button again to change the projection color (blue, green, purple, warm yellow), and finally press the "LIGHT" button to turn off the light. - 2.Projection Timing-Press and hold the "LIGHT" button for "3" seconds to enter the light setting, two boxes of 8 are displayed, the default is 30 minutes, and the light icon flashes. Press "LIGHT" button once to switch the projection color, press "UP" or "DOWN" button to set the light timing within 1-60 minutes, press "SET" button once to confirm the setting. - 3.LIGHT Icon Display-When turn on the light, without setting the timer mode, the "LIGHT" icon will be on for a long time. When setting the timer mode, the "LIGHT" icon flashes. | Alarm and sleep setting (ALARM) - 1.Press and hold the "ALARM" button for "3" seconds to enter the alarm setting. - 2.In the alarm mode, the middle two points of the clock does not flash. - 3.Press the "UP" and "DOWN" buttons to set the desired value in the sequence: hour - minute. Hold the "UP" or "DOWN" buttons to speed up the selection process. - 4. Press the "SET" button after setting a sequence to accept the selected value and continue with the next sequence. That is, first confirm the hour value, "AKARM" - "UP" or "DOWN" - select the hour digit - "Set"; then confirm the minute value, "AKARM" - "UP" or "DOWN" - select the minute digit - "Set". |