PT-PSE109GBRO POE Injector is a single port midspan Injector with 4 Pair PoE up to 95 watts of power at 55 Vdc at 1.75 Amp. Designed for the PoE++ powered 95W PoE Powered Devices (PDs), such as IP Cameras, wireless APs, Microwave radio, IoT application, door locks, displays, POS, and information kiosks, It supports 10/100/1000Mbps of data rates. Fully comply with IEEE802.3bt and remains compatible with any IEEE802.3af/at compliant devices. Equipped detecting chip inside, which will detect and classify PD before powering it, protecting non PoE device. Enclosed in an IP20 high-impact metal case, designed for indoor use but can work outdoor by covered with waterproof case. It works with a wide input voltage of 100-240VAC with 6KV surge protection, 50 or 60 Hz and operates under -40? to +65?. The effective distance limitation is 100 meters over Cat5e/Cat6 cables. See more

Manufacturer supply directly with two-year warranty and unlimited technical support, Wall mounted with mounting hole or placed on desk. Connect with normal switch to exchange data, provide sustained and stable power supply through Cat5e/Cat6 cable to remote pplincluding Ip Phones,Cameras, Wireless APP), effective distance is 100meters ( 109yd ). PoE 6ky surge protection, Operating Temperature: -40C to 65*C.can be outdoor used by covered with waterproof case. ULCB,CE,FCCCertification, all material used are ROHS compliant,complies to IEEE802.3af/atPoE++ standard, support transmission rate of 10/100/1000Mbps. Build-in detection chip inside which will detect and classify PD before powering it(Active PoE),protect output against over voltage, over current short circuit.