PT-PSE107GRO-S is an indoor rated fiber PoE midspan converter specially designed for complex industrial backhaul and networking applications, special scenarios, like highway side, exurb, etc.. Enclosed in an IP20 high-impact metal case but can work outdoor by covered with waterproof case. After negotiating IEEE802.3bt standard PoE, the single PoE output port delivers 55Vdc, 1.1A up to 60W power with 4KV surge protection for remote PDs over 4 Pair at 10/100/1000Mbps data rates. It works with a wide input voltage of 100-240VAC, 50 or 60 Hz and operates under -40? to +65?. It fully complies with IEEE802.3bt and remains compatible with any IEEE802.3af/at compliant devices, such as IP Cameras, wireless APs, Microwave radio, IoT application, door locks, displays, POS, and information kiosks. For planning purposes, the effective distance is 100 meters over Cat5e/Cat6 cables.

Wall mounted with mounting hole or placed on desk or Rack-mounted with waterproof case for outdooruse,manufacturer supply directly with two-year warranty and unlimited technical support. Works like a switch, data is interoperable among LAN port, PoE port and SFP port. Protect output against over voltage, over current, short circuit, especially PoE port with 4KV surgeprotection. CE FCC Certification, all material used are ROHS compliant,complies to EEE8023af/at PoE++ standardsupport transmission rate of 10/100/1000Mbps,wide temperature between -40°C to 60°C. Build-in detection chip inside which will detect and classify device before powering it.