Procet Single Port Active Gigabit PoE Plus Power Injector 802.3af 802.3at 55Vdc 30W for Most Surveillance Cameras Wireless Access Points VoIP Phones PT-PSE101G-AT PT-PSE101G-AT Surge Protection PoE Injector

 
Be Safe - We Directly Ship From Country of Origin
 
BE SAFE
WE ONLY SHIP
FROM OFFICIAL SUPPLIERS
 
From United States
To International
In 5-10 Days
US$19.99 Shipping Fees for any Order
 

GRAND SELECTION

Think of it and most probably we have it among our grand selection of products!

 

AMAZING PRICES

Get ready for the amazing and best Supps prices ever!

 

FIXED RATE DELIVERY

Get your order anywhere on this planet within 5-10 days with a fixed rate of $19.99 (no matter the size of your order)

 

 

 
 

Procet Single Port Active Gigabit PoE Plus Power Injector 802.3af 802.3at 55Vdc 30W for Most Surveillance Cameras Wireless Access Points VoIP Phones PT-PSE101G-AT PT-PSE101G-AT Surge Protection PoE Injector





Regular Price: US$59.99

Special Price US$49.99

Availability: In stock


Supplier: PROCET PoE System

Category: Electronics Computers & Accessories Networking Products Network Adapters Powerline Network Adapters


 
Be Safe - We Directly Ship From Country of Origin
 
BE SAFE
WE ONLY SHIP
FROM OFFICIAL SUPPLIERS
 
From United States
To International
In 5-10 Days
US$19.99 Shipping Fees for any Order
 

GRAND SELECTION

Think of it and most probably we have it among our grand selection of products!

 

AMAZING PRICES

Get ready for the amazing and best Supps prices ever!

 

FIXED RATE DELIVERY

Get your order anywhere on this planet within 5-10 days with a fixed rate of $19.99 (no matter the size of your order)

 

 

 
 

PT-PSE101G-AT is a single port PoE Injector. It provides 55Vdc, 0.55A power for remote PDs over 2-pairs output. It supports both 10/100 Base-T and Gigabit device. It works for 30W PoE PDs, such as wireless APs, Network cameras,IP Phones and other high power Ethernet terminals.It fully complies to IEEE802.3af/at PoE standard. PT-PSE101G-AT is designed for indoor use. It works with input voltage of 100-240Vac. It has detection chip inside, which will detect and classify PD before powering it. It will not apply power until a standard-compliant PD is detected. The effective distance is 100 meters over Cat5e/Cat6 cables. - Input :100-240Vac 1.0A 50/60Hz - Output: 55Vdc 550mA - Power Pins: 4/5(+), 7/8(-) - Data Speed: 10/100/1000Mbps - IEEE802.3 10Base-T Ethernet - IEEE802.3u 100Base-Tx Fast Ethernet - IEEE802.3ab 1000Base-T Gigabit Ethernet - Full compliant with IEEE802.3af/at - RoHS Compliance - WEEE Compliance - Operating Temperature: 0? to 40? - Operating Humidity: 20% to 80%, non-condensation - Storage Temperature: -20? to 70? - Storage Humidity: 10% to 90%, non-condensation - Operating Altitude: up to 2000meters - Case: Plastic - Color: Black - Mounting: Wall-mounted - IP Rated: IP40 - Size: 140mm X 63mm X 33mm - Weight: 205g - Packing.:0.8 meters power cord with US plug x 1, Manual x 1 - Full details and data sheet at: http://www.poesystem.com/single-port1/PT-PSE101G-AT-PoE-Injector.html See more

Manufacturer supply directly with two-year warranty and unlimited technical support, Wall mounted with mounting hole orplaced on desk. connect with normal switch to exchange data, provide sustained and stable power through Cat5e/Cat6 cable to remote PD,effective distance is 100meters ( 109vd ). Support transmission rate of 10/100/1000Mbps(Gigabit), protect output against over woltage, over current, short circuit. CE, FCC Certification, all material used are Rohs compliant, fully complies to lEEE802.3at standard. The built-in active detection chip provides power and signal for all EEE802.3af and lEEE802.3at standard POE devices.

Also Purchased

Verified Customers Reviews
My Cart
Item
Continue Shopping