PT-PSE104GB-60-10 is a single port 10G 10Gbps midspan Injector with 4 Pair PoE up to 60 watts of power at 55VDC at 1.1amp.Designed for the PoE++ powered 60W PoE Powered Devices (PDs),specially for WiFi 6 routers and 10GbE devices.It supports not only 10/100/1000Mbps of data rates, but also 2.5G/5G/10GbE NBase-T. Fully comply with IEEE802.3bt and remains compatible with any IEEE802.3af/at compliant devices. Equipped detecting chip inside, which will detect and classify PD before powering it, protecting non PoE device.Enclosed in an IP40 fire retardant plastic case, designed for indoor installation with a wall mount bracket.It operates with a wide input voltage of 100-240Vdc.The effective distance limitation is 100 meters over Cat5e/Cat6 cables. - Input :100-240Vac 1.5A 50/60Hz - Output: 55Vdc 1100mA - Power Pins: 4/5(+), 7/8(-) and 3/6(+),1/2(-) - Data Speed: 10/100/1000Mbps & 2.5/5/10GbE - IEEE802.3 10Base-T Ethernet - IEEE802.3u 100Base-Tx Fast Ethernet - IEEE802.3ab 1000Base-T Gigabit Ethernet - IEEE802.3bz 2.5GbE/5/10GbE NBASE-T - Full compliant with IEEE802.3af/at,PoE++ - RoHS Compliance - WEEE Compliance - Operating Temperature: 0? to 40? - Operating Humidity: 20% to 80%, non-condensation - Storage Temperature: -20? to 70? - Storage Humidity: 10% to 90%, non-condensation - Operating Altitude: up to 2000meters - Case: Plastic - Color: Black - Mounting: Wall-mounted - IP Rated: IP40 - Size: 145.51mm X 65.8mm X 33.5mm - Weight: 255g - Packing.:Power Cord x 1(0.8 meters) with US plug, Manual x 1

Manufacturer supply directly with two-year warranty andunlimited technical support, Wall mounted with mounting hole orplaced on desk. Connect with normal switch to exchange data, provide sustainedand stable power through Cat5e/Cat6 cable to remote PD,effective distance is 100meters ( 109yd ). Support not only 10/100/100Mbps of data speed. but also2.5G/5G/10G bps transmission rate for Wi-Fi 6 router, protectoutpuiagainst over voltage, over current, short circuit. UL CE FCC CB Certification, all material used are Rohs compliant,complies to lEEE802.3bt, backward compatible toFEE802.3af/at PoE++ standard. Build-in detection chip inside,which will detect and classify PD before powering it(Active PoE).