Power up to 12 IP cameras, desktop VoIP phones, WiFi access points, or other low voltage devices through a network data cable using this Power over Ethernet (PoE) injector. This passive PoE midspan injector will always deliver the same voltage as its power source. Combine this product with a 48 or 56 volt power supply for IEEE 802.3af or at compatibile installations. Or choose a 24 volt power supply for Ubiquiti and Mikrotik installations.

Save Big on Network Upgrades and Device Installations

Power over Ethernet delivers power 328 feet from the PoE injector, eliminating the expense and hassle of installing AC power near your powered device. Use this midspan injector to add PoE to an existing ethernet cable: 1 data port in + 1 PoE port out. Or you can use the injector to increase the amount of PoE available to network devices downstream, without altering your upstream PoE switch equipment or network configuration. Our PoE injector adds power, but unlike a switch, does not manage data. Each “PoE out” port has its own “Data In” port with a total of 12 + 12 available on the multi port unit.

Simplify & Declutter Your Setup

Our midspan injector offers an array of PoE out ports all together in a single module for wide versatility and flexibility in system installations. Instantly add PoE to any switch. Benefit from a cost-effective and efficient way to power multiple devices without changing your network configuration. Use this 12 port, rackmount midspan PoE injector for IEEE 802.3af or at PoE applications or kit it with a 24 volt power supply for Ubiquiti or Mikrotik. Eliminate clutter in your setup and extend power up to 328 feet (100 meters) distance from the source.

Replace up to 12 individual PoE injectors and condense your installation into a single, gigabit PoE module with 10/100/1000 Mbps data operation. Simplify your setup with all your data ports (In) and all your PoE ports (Out) housed together in one convenient, streamlined unit.

More PoE for Compatible Devices

• WiFi Access Points
• VoIP Phones (Polycom, Cisco, Yealink)
• IP Cameras (Swann, Lorex, Reolink)
• 802.af devices
• 802.at devices

NOTE: Compatible with IEEE 802.3af or at devices with “always on” passive PoE

NOTE: Passive PoE is always on, so do not use on ports where a non-PoE device can be connected