Wall mount 8 port PoE injector with power supply Features Extend power up to 328 ft (100 meters) 8 RJ45 ports with Data + Power out 8 RJ45 LAN ports for 10/100 Data in - connect to any switch 2.1mm x 5.5mm DC power input LED power status 10/100 operation 24 volt, 60watt power supply included (100-240v autosense, 50/60hz, UL / FCC/ DoE / CE listed) * NOT for use with IP phones - use our 48v kit (POE-8-48v60w) instead Use to provide PoE power to: Ubiquiti and OM2P Access points - For UBNT AC lite - please use GPOE-8B-24v60w Ubiquiti Aircam cameras Tranzeo and other 24v devices NOTE: If your devices spec 802.3af, please see our 48v products This device provides power on the spare data wires of the Ethernet cable. Passive PoE will allow all devices to receive 24 volts and up to 60 watts combined. Check device specs for power needs. Other Options and Products from PoE Texas Kits with 48 volt power supply available Kits with 24 volt 120 watt power supply Gigabit versions GPOE-8B-24v60w - 8 port version with 10/100/1000 gigabit capability GPOES-8-7AB-24v60w - with integrated switch POE-16-24v120w - 16 Port 10/100 rackmount with 24v 120w GPOE-16AB-24v120w - for 16 Ports 10/100/1000 with 120 watts PoE-Tester-GEN2 to display power used by a device GAF-5v and GAF-12v - 5 volt and 12 volt splitters

For expert technical support from Austin, TX please call 512 479 0317. Passive Mode B operation (pins +4,5/-7,8) is "always on". Use to provide PoE power and 10/100 data to devices like Ubiquiti*, and OM2P access points (*For UBNT AC Lite please use GPOE-8B-24v60w). Includes a 24 volt, 60 watt UL certified power supply. Use to expand your network by adding PoE Power up to 328 feet for 8 devices.