SaiLteL's Hardened Industrial Gigabit PoE Injector

SaiLteL's Hardened 30W/95W Gigabit PoE Injector allows you to connect the IEEE 802.3 af/at PoE device such as camera and access point with a non PoE LAN switch within the distance of 100m.

95W Gigabit PoE ++ Injector

Features:

-- 12~48VDC Power Input;

-- 1 RJ45 Ethernet Data Input Port + 1 RJ45 Power Over Ethernet

Output Port(Data + Power);

-- Support IEEE802.3at Power over Ethernet(PoE+) Power Sourcing Equipment;

-- Support 10/100/1000Base-TX;

-- Power Pin Assignment: 4/5(+), 7/8(-);

-- Support DIN-Rail & Wall-Mount installation;

-- Extensive LED indicators for PoE diagnostics;

-- Environmentally Hardened -40°C to 80°C (-40°F to 176°F) operating temperature;

--Max. Power per Port: 30W Max per port (Alternative B Mode)

--Maximum Distance: Cat5 UTP up to 100m

-- Dimensions (WxDxH): 95*70*30 mm (3.74*2.76*1.18 inches);

-- Weight: 0.25Kg (0.55Ib);

-- Casing: Aluminum Case;

Plug & Play

SaiLteL's 95W POE adapter provides an integrated power solution with 12~48VDC wide range voltage input.

Application

Support 4K/8K camera transmission. It’s widely used in wireless AP / CCTV security transmission / VoIP IP phone system/ Robust fiber ring network etc

How To Set Up:

a) Connect the Ethernet port of the injector to a LAN switch with a network cable.

b) Connect the PoE Out port to the PoE device.

c) After the device is powered on, the PWR indicator will all be on. If the indicators are not on, check the power supply connection.

d) After all cables are correctly connected, the indicators will be lit as per port status LEDs.

Package Content:

1 * SaiLteL 95W PoE Injector

1 * Quick Start Guide

1 * L-Shaped Wall Mount Bracket