POE Extender 2 Port PoE-Powered PoE-sourcing ethernet Switch Repeater 100m 1 in 2 Out Comply IEEE 802.3af/at Standard 10 100Mbps for Security Camera Over Cat5/Cat6 or UTP Cables

BE SAFE

WE ONLY SOURCE

FROM OFFICIAL SUPPLIERS

From United States

To International

In 5-10 Days

US$19.99 Shipping Fees for any Order

GRAND SELECTION

Think of it and most probably we have it among our grand selection of products!

AMAZING PRICES

Get ready for the amazing and best Supps prices ever!

FIXED RATE DELIVERY

Get your order anywhere on this planet within 5-10 days with a fixed rate of $19.99 (no matter the size of your order)

+1 (844)-467 8777

PHONE:

+1 (844)-467 8777

POE Extender 2 Port PoE-Powered PoE-sourcing ethernet Switch Repeater 100m 1 in 2 Out Comply IEEE 802.3af/at Standard 10 100Mbps for Security Camera Over Cat5/Cat6 or UTP Cables

Regular Price: US$41.99

Special Price US$34.99

Availability: In stock

Supplier: exgoofit

Category: Electronics Computers & Accessories Networking Products Switches

Qty:

POE Extender is a cost effective way to extend the Ethernet network range beyond 100m, delivering both data and power to network devices such as WLAN Access Points and Network Cameras up to a distance of 200m while complying with IEEE PoE and Data standards.

The PoE Extender supports 10/100Mbps data rates and delivers 802.3af power levels, up to 15.4W, The PoE Extender does not require local power and is powered via the PoE input. Extended PoE installation range by additional 100m

Supports 10/100Mbps data rates

- Provides 802.3af power levels when powered by any 802.3at source

- Extenders can be cascaded to reach up to 700m

- Cost effective installation - no need for local power

- Plug and play installation - no configuration needed

Features

Comply with IEEE 802.af Power over Ethernet (10/100M Supported)

Extender the range of PoE an additional 100 meters

Automatically detects and protects PoE equipment from being damaged by incorrect installation

Plug-and Play no configuration required

2 Port PoE extender can forward both Ethernet and PoE power for 1 terminal equipment via Cat5 ,Cat5e,Cat6,Cat6e,UTP cable.

2-Port PoE Extender has 3 10/100M Lan ports, among them, one for power input, the other two for power output. Comply with 10/100BASE-TX,IEEE 802.3 af-PoE.

Power input for one port is 13W. Power output for four port is 12.2W.

Used with AP, IP camera, IP telephone and the other network equipment in the situation of the lack of power line or far away from the power outlets

Installed at hotels, schools, buildings, villages, etc.

Specification

POE input: 1 RJ45 port (DC 44-57V, 802.3at)

POE output: 2 RJ45 port (48V, 802.3af)

POE Pin Output: 1/2(+), 3/6(-); MAX Power 15W

Network Medium: Cat5 or better UTP cables (less than 120m)

Repeater Mode: Store and forward

MAC Address Table: 2K

Packet Buffer Memory: 48 Byte

Switching Capacity: 1.0Gbps

PoE Standard: IEEE 802.3af

Input power: 13 Watts

Output power: 12.2 Watts

Power Supply Type: 1/2+,3/6-,Mode A, End-Span

Network Protocol: IEEE 802.3i-10BASE-T, IEEE 802.3u: 100BASE-TX, IEEE 802.3x-Flow Control, IEEE 802.3af-Power over Ethernet;

Regulation Compliance: FCC Part 15B, ROHS Directive 2011/65/EU, Low Voltage Directive 2014/35/EU,EMC Directive 2004/108/EC;

Working temperature: -10°c to 45°c

Working Humidity: 5%~90%, No Condensation;

Dimension: 44x88x22mm / 2.95'' x 3.46'' x 0.86''

Weight: 52g


	4-Port 10/100M POE Extender

It's able to forward Ethernet and PoE power for 1 terminal equipment via Cat5,Cat5e,Cat6,Cat6e,UTP cable(less than 120m). Cost effective installation - No local power and other configuration required. Powered via the PoE input, Plug and Play. Automatically detects and protects PoE equipments from being damaged by incorrect installation. Supports 10/100Mbps data rates, comply with IEEE802.3at and IEEE802.3af Standard. Provides 802.3af power levels when powered by any 802.3at source. The POE extender can extend the range of the Ethernet network by an additional 100m (328 ft). Maximum 6 pieces, total 700 meters (2296ft) when deployed in cascade. PoE Injector Adapter, A PoE-powered PoE-sourcing ethernet switch. One 30W PoE input port and two 15W PoE output port, running one cable to connect to 2 POE IP devices.