Use PoE injector with PD to expand your network to where there are no power lines or outlets,where you wish to fix devices such as APs,IP camera or IP Phone,etc. The PoE injector is a single port poe injector offer a compact and cost effective,it can convert standard 100-240V ac power into low-voltage. DC that runs over existing LAN cable to power up IEEE 802.3af/at compliant network accessories. Remote powering of wireless LAN(WAN) access points,IP security cameras,VoIP telephone and other low port density installations. Features: Up to 15.4W/30W of Power on 2-pairs Supports 10/100/1000 Base-T applications Led indicators power input and poe output Internal ac/dc converter no need for external power brick easy plug and play installation Muti-protection Specification: Pass Through Data Rates: 10/100/1000Mbps Out Power Voltage: 48~56VDC User Port Power: 35W max AC Input Voltage: 100-240VAC Ac Input Current: 0.5A 100-240VAC AC Frequency: 50 to 60 HZ Dimensions: 140x50x34 mm System Indicator: AC power Connectors: shielded RJ-45,EIA 568A and 568B Operating Ambient Temperature: -0 to 40 ? Storage Temperature: -40 to 60 ? Installation Steps 1.Use a CAT5e UTP cable to connect port of Ethernet devices to the DATA IN port 2.Connect AC cable with Injector and Socket 3.Connect the PoE OUT port to a PD with CAT5 UTP cable

Compact and cost-effective Gigabit PoE/PoE+ injector, IEEE 802.3af/802.3at compliant. Plug & play, no configuration is needed, simply connect a PoE network device, accommodates most installations scenarios. 1 Gigabit Ethernet port input and 1 PoE+ Gigabit Ethernet port output. Auto-sensing technology delivers up to 30W to an 802.3at PoE+ device with backwards compatibility for 802.3af PoE (15.4W) devices. Converts a non-PoE Gigabit port to a PoE+ Gigabit port and Network a PoE device located up to 100 meters (328 ft.) away.