PhilaeEC Piggy Bank Perfect as kids' Gift on Birthday, Christmas Day, New Year, Children Day

How to use:

1.Enter four-digit password(default 0000), after done, a green light turns out. If you enter the wrong password, the red light will be illuminated. The Money Bank will remind you "please try again".

2.Rotate the knob clockwise to open the door. Green light shines for about 10 seconds, you will hear a creaking sound. If the door open for more than 10 seconds, the green light stops flashing, keep beeping sound every 20 seconds. Close the door to stop the beeping sound.

3.Insert the coins from the coin slot on top of the bank and when you deposit banknotes, it will suck the money instead of sliding it in. Then press the password to withdraw money.

Forgot your password?

In any case, if you forget your password, just take out the batteries, wait for at least 15 mins and restart, the password returns to "0000".

Q:I flipped the switch at the back, why can't the door be opened?

A:When the piggy bank is in "Voice Mode", you must wait for the end of the voice input every time you enter a number, and then press the next number. You cannot press it continuously, otherwise the machine will not recognize your password and the door will not open.

PhilaeEC ELECTRIC ATM PIGGY BANK

Use Guide:

To open the safe, you first need to enter a four-digit password. Safe default password is: 0000.

Follow these steps to use safe:

1. Enter the four-digit password, and green lights. If you enter the wrong password, the red light will be lit, and will issue "PLEASE TRY AGAIN" voice tell you.

2. Clockwise knob, opened the door. Green light for about 10 seconds, you will hear the creak of the door opening. If the door is open for longer than 10 seconds, the green light is off, and beep sound once every 20 seconds. To stop the beep, you can close the door.

3. Banknote banknotes into the mouth, the bill can be directly admitted. Then press the password can withdraw money.

4. When you are finished, close the door lock is good.

Hou to change the password, follow these steps:

1. Enter the current password (default 0000) to open the safe door.

2. Hold the "*" button down, both green and red lights flash (Hold down the "*" button and don't let go).

3. Within 15 seconds, enter the new 4-digit password, press "#" to confirm to store the new password. Light stops flashing.

Note: If the new password is not entered within 15 seconds, the program will stop, you must restart the program.

4. Release the "*" character button and close the door.