Activation IMPORTANT TIP

(important tip):After activation, keep connected, wait for 5 seconds, then turn off and lock the car and let it sleep for 15 minutes. Disconnect the negative pole of the car battery for another 1 minute and then connect it back. Then get on the car and install other steps!

How to connect the red, white and black terminals of the E60 activator?

* If you're going to install an Android screen, make sure you don't install these three red, white and black wires!

Steps in connecting the red, white and black three wire terminals:

1- Take the big plug of the OEM ISO out of the back of the radio;

2- Take the 1st socket out of the big ISO plug;

3- Take the 2nd socket out of the 1st socket;

4- Insert the red, white and black terminals into the second socket;

5- Return the second socket and the first socket to the large ISO socket;

6- Plug the big ISO socket back into the back of the OEM radio;

This way you can get the sound of AUX.

Please activate the AUX menu before installing the Android screen to be effective.

If you have an Android screen installed, Please remove the Android screen and wiring harness. Leave it in the same state as before installation. Activate the AUX menu first. Then reinstall the Android screen. Otherwise you will not get the AUX menu.

if you want get the phone's sound via bluetooth, you can buy below PEMP bluetooth aux BOX

When your get the OEM aux menu, if you want get the phone's sound via bluetooth , you can buy the ASIN: B0BBF973NP

Step 1. Connect the 3.5mm headphone plug male connector to the activator female connector;

Step 2. Open the OEM aux menu;

Step 3. Connect the phone Bluetooth according to the Bluetooth AUX box ASIN: B0BBF973NP instructions, you can get the sound of your phone.