PEGATISAN CCTV Camera Tester HD Display Video Monitor AHD/TVI/CVI/CVBS IP Camera Test Coaxial Analog Camera Monitor Tester 8MP/5MP/1080P/UTP/PTZ Cable Test/DC12V Output 5 Inch Portable Tester

BE SAFE

WE ONLY SOURCE

FROM OFFICIAL SUPPLIERS

From United States

To International

In 5-10 Days

US$19.99 Shipping Fees for any Order

GRAND SELECTION

Think of it and most probably we have it among our grand selection of products!

AMAZING PRICES

Get ready for the amazing and best Supps prices ever!

FIXED RATE DELIVERY

Get your order anywhere on this planet within 5-10 days with a fixed rate of $19.99 (no matter the size of your order)

+1 (844)-467 8777

PHONE:

+1 (844)-467 8777

PEGATISAN CCTV Camera Tester HD Display Video Monitor AHD/TVI/CVI/CVBS IP Camera Test Coaxial Analog Camera Monitor Tester 8MP/5MP/1080P/UTP/PTZ Cable Test/DC12V Output 5 Inch Portable Tester

Regular Price: US$227.99

Special Price US$189.99

Availability: In stock

Supplier: PEGATISAN

Category: Electronics Security & Surveillance Surveillance Video Equipment Security Monitors & Displays

Qty:

VGA/TVI/AHD/CVI/HDMI Input Coaxial Analog Video Monitor Tester 8MP/5MP/4MP/3MP/1080P/UTP/PTZ Cable Test/DC12V Output CCTV Monitor Tester

The new HD Coaxial tester is developed for the on-site installation and maintenance of Analog Camera (CVBS) and HD Coaxial Camera, having TVI,CVI, AHD. It also provides many useful functions, such as video display, PTZ control, DC12V output power, audio test, image generator, VGA video signal input, HDMI1.0 signal input, RS485 data searching, cable testing, LED lamp etc.

NOTE:The camera tester cannot be used at low voltage. When the analog test monitor prompts low voltage or low battery, you need to stop using it and charge it

Q&A

Q: IP camera can not be tested.

A:This tester not supports any IP cameras testing, it can only be used to test analog cameras.

Q: The tester can not produce pictures.

A:When the device is switched to CVI mode, only connected to CVI camera can it produce pictures. If the camera is other TVI / AHD signal camera, the mode should be switched to TVI / AHD signal correspondingly, so that the connected camera can produce pictures but not flicker.

Q:Must this be plugged in, in order to turn on or does the batteries need to be charged?

A:This tester is built-in battery, as long as the battery power is sufficient, you can turn it on normally, if not, that means that the battery power has been consumed, you need charge it, fully charge it and then you can unplug the power supply to use.

Q:HDMI isn’t recognized.

A:If HDMI is used as the display input, it can only be connected to the NVR or DVR which with an input signal of HDMI. If HDMI is a signal output, it needs to be connected to the display or TV.

HD CCTV Tester

Rechargeable

Power the camera with DC 12V (1A) power output from the tester. It is helpful for demo and testing when the power supply is not available. Built-in 2* 18650 2600mA battery, after charging 3-4 hours, working time lasts 11 hours.

Video Signal Testing

Video monitor tester, high-resolution 5.0 inches 800 (RGB) x480 wide viewing angle display, Viewing angle larger, more intuitive and easy to display the camera image quality. Support PAL/NTSC standard video signal.

Portable CCTV Tester

You can carry this analog camera tester with you at any time via a lanyard, giving you as much convenience as possible while you work.

Auto power off: 1-30 (mins)
Working temperature: 14? ~ 122? (-10? ~ +50? )
Humidity: 30%-90% Rh
Color bar generator(TV OUT)

Analog Camera CCTV Tester

4 in 1 CCTV Tester(Not Support IP Cameras)

Tips

This cctv tester monitor NOT supports IP Camera

TVI camera test: HD TVI video surveillance testing, support 1MP, 2MP, 3MP, 4MP, 5MP,8MP. When TVI signal input, the tester will display HD TVI camera image.

AHD camera test: HD video surveillance testing, support 1MP, 2MP, 3MP, 4MP, 5MP,8MP. When AHD signal input, the tester will display the AHD camera image.

CVI camera test: HD video surveillance testing, support 1MP, 2MP, 3MP, 4MP,8MP. When CVI signal input, the tester will display the CVI camera image.

CVBS: PAL/NTSC, 800tvl/1000tvl/1 200tvl analog camera.

5 Inch 4 in 1 CCTV Monitor Tester

VGA/HDMI input:Max support 1920X1080 video input

UTP Cable Tester UTP cable test:Display UTP cable connection status , cable type and the sequence of wires as well as read the number of the test box.

DC12V 1A Power Output:Output DC12V1A power for camera

Audio Input Test:1 channel audio signal input

Power Adapter:DC 5V(1.5A) Battery:Built-in 18650 2600mA battery X 2 Rechargeable:After charging 3-4 hour, working time lasts 11 hours Low Consumption:Energy saving , battery capacity indicator.

PTZ Controller

Video monitor tester built-in Pelco-D / P PTZ control protocol etc , through its own RS485 interface, the user can control the PTZ up, down, left, right rotation, and adjust one machine zoom, focus,aperture size.

Signal mode	NTSC/PAL (Auto adapt)
Display	5.0 inch VGATFT-LCD,800 (RGB) X 480 resolution
LCD adjustment	Brightness, Contrast, Saturation adjustable
Video IN/OUT	1 channel BNC Input & 1 channel BNC Output
PTZ Controller	Support RS485
PTZ Protocol	Compatible with protocols PELCO-D/P
Baud Rate	600,1200,2400,4800,9600,14400bps
Video Signal Generation	Support both PAL/NTSC format’sstandard color bar output (Red, GreenBlue, White, Black, Grey) and testing imageoutout

UTP cable test	Display UTP cable connection status , cable type and the sequence of wires as well as read the number of the test box.
DC12V power output	Output DC12V1A power for camera
Audio input test	1 channel audio signal input
TVI video signal test	1 channel TVI input(ENC interface), support 720P 25/30.50601080P 3MP/4MPand 5MP 25/30
AHD video signal test	1 channel AHD input (BNC interface ) ,support 720P 25/30/50,60 1080P 3MP/4MPand 5MP 25.30
CWl video signal test	1 channel CVI input(BNC interface), support 720P 25/30150.601080P25/30 3MP and 4MP12.5/20
AC/DC current	660.0uA,6.600mA,66.00mA,660.0mA10.00A
Battery	Built-in 18650 2600mA battery X 2

[CCTV Camera Tester] 5 inches Ultra HD resolution viewing angle display, clear picture quality, support PAL/NTSC standard video signal. Support CVBS/AHD/TVI/CVI camera test. (Does not support IP cameras)

Language:English and Chinese optionalt

Dimension/ Weight:194mm x 112mm x 48mm / 540g

[Product List]

Adapter DC5V 1.5A (with USB cable) *1 Power output conversion cable *1

BNC cable *1 RS485 connector *1

International Standard 18650 2600ma battery *2

Lanyard *1 Tool bag *1 Audio cable *1

HD coaxial tester *1 Instruction Manual *1

?CCTV Camera Tester?The CCTV tester builts in 2 18650 2600mA battery, DC12V 1A output power supply, use the DC12V power supply output by the tester to power the camera, and it can work continuously for 11 hours after being fully charged.(note:The device cannot be used at low voltage. When the device prompts low voltage or low battery, you need to stop using it and charge it ). ?Analog Camera Tester?The tester supports UTP cable testing, displaying the UTP cable connection status, cable type and wire sequence, and reading the test box number. The monitor of this multi-function CCTV tester also supports VGA input and HDMI input. You can use the monitor and DVR recorder to work together. ?PTZ Controller?The CCTV tester has built-in Pelco-D/P PTZ control protocol, etc. Through the built-in RS485 interface, the user can control the up and down, left and right rotation of the PTZ, and can adjust the zoom, focus, and aperture size in one machine. ?Camera Tester?The analog camera tester is specially developed for on-site installation and maintenance of analog cameras and high-definition coaxial cameras, providing many useful functions, such as video display, pan/tilt control, DC12V output power, audio testing, image generation Adapter, VGA video signal input, HDMI1.0 input(It is Suitable for Testing DVR/NVR), RS485 data search, cable test, LED lights, etc. ?CCTV Tester Monitor?Upgraded 5.0-inch 800 x 480 high-resolution analog camera tester with clear picture quality and supports PAL/NTSC standard video signals. Support CVBS/AHD/TVI/CVI camera test. (maximum support 8MP AHD/TVI/CVI, Only supports analog cameras).