OSOYOO 3pcs Nano Atmega328P Module CH340 5V/16M USB-C Micro-Controller Board for Arduino Nano V3.0 3x Nano + 1x cable

BE SAFE

WE ONLY SOURCE

FROM OFFICIAL SUPPLIERS

From United States

To International

In 5-10 Days

US$19.99 Shipping Fees for any Order

GRAND SELECTION

Think of it and most probably we have it among our grand selection of products!

AMAZING PRICES

Get ready for the amazing and best Supps prices ever!

FIXED RATE DELIVERY

Get your order anywhere on this planet within 5-10 days with a fixed rate of $19.99 (no matter the size of your order)

+1 (844)-467 8777

PHONE:

+1 (844)-467 8777

OSOYOO 3pcs Nano Atmega328P Module CH340 5V/16M USB-C Micro-Controller Board for Arduino Nano V3.0 3x Nano + 1x cable

Regular Price: US$47.99

Special Price US$39.99

Availability: In stock

Supplier: OSOYOO

Category: Electronics Computers & Accessories Computer Components Single Board Computers

Qty:

Frequently bought together :

Price for all selected :

US$79.97

The same size and pinout as Nano V3.0

Microcontroller: Atmel Atmega328P-AU

Architecture: AVR

Flash Memory: 32 KB of which 2 KB used by bootloader

SRAM: 2 KB; EEPROM: 1 KB; Clock Speed: 16 MHz;

USB to Serial convert chip:CH340C

8 Analog I/O inputs:A0 ~ A7(each of which provide 10 bits of resolution)

14 Digital I/O Pins:TX,RX,D2 ~ D13.

1 pairs of TTL level serial transceiver ports RX / TX.

6 PWM Output: D3, D5, D6, D9, D10, D11.

DC Current per I/O Pins: 40 mA (I/O Pins)

Microcontroller

ATmega328P–8 bit AVR family microcontroller.

The CH340 chip on the Nano is only powered if the board is being powered over USB.

The ATmega328 has 32 KB, (also with 2 KB used for the bootloader. The ATmega328 has 2 KB of SRAM and 1 KB of EEPROM.

Power

The OSOYOO Nano can be powered via the USB-C connection, 6-12V unregulated external power supply , or 5V regulated external power supply . The power source is automatically selected to the highest voltage source.

Input Voltage: 7-12 V; Power Consumption: 19 mA

Easy using-with USB-C cable,included USB-C to USB-A cable and USB-C to USB-C cable ,Type C port for power, programming and debugging.

Input and Output

Each of the 14 digital pins on the Nano can be used as an input or output, using pinMode(), digitalWrite(), and digitalRead() functions. Some pins have specialized functions:

Serial: 0 (RX) and 1 (TX). Used to receive (RX) and transmit (TX) TTL serial data. These pins are connected to the corresponding pins of the CH340C USB chip.

Package Include

Package Include : 3x OSOYOO Nano Board and 1x USB-C Cable

1x OSOYOO Nano board and 1x USB-C Cable

PCB Size: 18 x 43 mm

Weight: 8 g

The OSOYOO Nano has a variety of facilities for communicating with a PC or other microcontrollers, and fully compatible with Windows, Mac and Linux operating system.This board especially is breadboard friendly and is very easy to handle the connections. OSOYOO Nano has 14 digital I/O pins (6 of which can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a power USB-C jack, an ICSP port and a reset button. The OSOYOO Nano can be powered via USB-C connection,included USB-C to USB-A cable and USB-C to USB-C cable. 6-12V unregulated external power supply , or 5V regulated external power supply.The Nano is automatically sense and switch to the higher potential source of power, there is no need for the power select jumper. Using Atmel Atmega328P-AU as MCU, Support ISP download; Support USB download and Power.Compatible with Arduino Nano V3.0 fully compatible with Windows, Mac and Linux operating system. OSOYOO Nano board is tiny and breadboard friendly microcontrollers based on the CH340/ATmega328. It works the same as original Nano and is very cost-effective for beginners to get started.